A positive value specifies counterclockwise rotation.
Standard angles measure rotation counterclockwise with respect to the.
Entering a positive number creates counterclockwise arc segments.
Remove the detonator housing by unscrewing it counterclockwise.
The default direction for positive angles is counterclockwise.
Rotates the representation counterclockwise or clockwise.
Rotates an object 90 degrees counterclockwise.
Quadrants are numbered counterclockwise, one through four.
Turn the FASTENER NUT counterclockwise to tighten it.
The incubator rotates one slot counterclockwise every 12 seconds.
Turn the wrench counterclockwise to open the instrument grips.
The elliptical arc is drawn counterclockwise between the start point and endpoint.
The default positive angle measurement is counterclockwise.
Octants are numbered counterclockwise from the 3 o'clock position, as shown in the following illustration.
Achtel werden von der 3-Uhr-Position aus gegen den Uhrzeigersinn durchnummeriert, wie aus der folgenden Abbildung ersichtlich wird.
The resulting arc is always created counterclockwise from the start point.
A positive angle rotates the grid counterclockwise about its base point.
For Head 2, the angle is measured counterclockwise.
A positive value for indicates a counterclockwise rotation about the B-axis.
[PROD105] rotates each object counterclockwise by 90 degrees.
The table rotates by 90 degrees counterclockwise about its origin.