inglês

alemão árabe catalão checo chinês coreano dinamarquês eslovaco espanhol farsi francês grego hebraico hindi húngaro inglês italiano japonês neerlandês polonês português romeno russo sueco tailandês turco ucraniano vietnamita

chinês

Definição alemão árabe catalão checo chinês coreano dinamarquês eslovaco espanhol farsi francês grego hebraico hindi húngaro inglês italiano japonês neerlandês polonês português romeno russo sueco tailandês turco ucraniano vietnamita

Favoritos

open loop

Tradução de "open loop" em chinês

NEW

开环

A maximum closed or open loop pressure force limit may be set for each profile segment.

可为分布图中的每个阶段设置最大闭环或开环压力限制。

Tonnage pressure control may be closed or open loop.

载重量压力控制可以是闭环的也可以是开环的。

Open loop system suitable for all applications. Â

开环系统适合所有应用场合。

Activation can carried out direct with the switch output signals of an open loop control

可以直接通过开环控制的开关输出信号执行启用

Research on the signal processing method to improve dynamic range in open loop fiber optic gyros

信号处理提高开环光纤陀螺动态范围的方法研究

Maintains conditions just before switching to open loop.

：在切换到开环之前，保持该状态。

A power supply with a high open loop gain regulator which acts like an operational amplifier and can be programmed with passive components.

具有高开环增益调节器的电源，其作用就像一个运算放大器，可与被动元件进行编程。

Mode2: Open loop due to detected system malfunction

模式 2：由于检测到的系统故障而开环

A maximum open loop pressure limit may be set for each profile segment when using a separate pressure control valve.

使用单独的压力控制阀时，可为分布图中的每个阶段设置最大开环压力限制。

This method not only improves the dynamic range but also solves the drift problem of the open loop fiber optic gyroscope.

该方法不仅提高了开环光纤陀螺系统的动态范围，而且很好地解决了光纤陀螺的漂移问题。

The feedforward control speed can be pushed faster than the feedback controller speed because the feedforward controller is an open loop control, i.e., the feedforward is inherently stable in its operation as long as the feedforward models are stable, whereas feedback control can become unstable if the control speed is pushed too hard.

可将前馈控制速度推进得比反馈控制器速度快，因为前馈控制器为开环控制，即只要前馈模型是稳定的，前馈操作便是内在稳定的，然而如果将控制速度推进得太多，反馈控制便能成为不稳定的。