Tradução de voz, recursos offline, sinónimos, conjugação, jogos de aprendizado
Publicidade
Registe-se gratuitamente: aceda a mais resultados e funcionalidades
returns an integer value
Tradução de "returns an integer value" em chinês
返回一个整数
Compares two strings and returns an integer value that represents the result of the comparison.
比较两个字符串，返回一个代表比较结果的整数值。
The Delete method deletes an existing service. It returns an integer value of 0 if the service was successfully deleted, 1 if the request is not supported, and any other number to indicate an error.
Delete 方法删除现存服务。如果服务成功删除，它就会返回一个 0 值，如果请求不受支持，值为 1；其它数字表示有错误。
The Create method creates a new process. It returns an integer value of 0 if the process was successfully created, and any other number to indicate an error.
Create 方法创建了一个新处理。如果创建成功，它就会返回一个 0 值，如果请求不受支持，值为 1 并且其它值表示错误。
The SetGateways method is used to specify a list of gateways for routing packets destined for a different subnet than the one this adapter is connected to. A more specific route should not exist for this subnet. The method returns an integer value of 0 on successful completion and any other number to indicate an error.
SetGateways 方法用于为不发送到这个适配器连接的子网而是发送到另一个子网上的路由器数据包指定网关列表。更确定的路径不因该在这个子网上存在。该方法在成功完成时返回一个 0 值，其它值表示错误。
The Create method creates a new process. The method returns an integer value that can be interpretted as follows: 0 - Successful completion. 2 - The user does not have access to the requested information. 3 - The user does not have sufficient privilge. 8 - Unknown failure. 9 - The path specified does not exist. 21 - The specified parameter is invalid. Other - For integer values other than those listed above, refer to Win32 error code documentation.
Create 方法会创建一个新的进程。该方法返回一个整数，其意义分别如下： 0 - 成功完成； 2 - 用户不具有访问请求信息的权限； 3 - 用户没有足够的特权； 8 - 出现不明错误； 9 - 指定的路径不存在； 21 - 指定的参数无效； 其他 - 关于上面所列以外的整数值，请参阅 Win32 错误代码文档。
Clears the specified event log, and optionally saves the current copy of the logfile to a backup file. The method returns an integer value that can be interpretted as follows: 0 - Successful completion. 8 - The user does not have adequate privileges. 21 - Invalid parameter. Other - For integer values other than those listed above, refer to Win32 error code documentation.
清除指定的事件日志，并可选性地将当前的日志文件副本存到一备份文件。这个方法返回一个整数值，此整数值可有以下几种解释： 0 - 成功完成。 8 - 用户没有足够的特权。 21 - 无效参数。 Other - 上面列举的以外的整数值，请参考 Win32 错误代码文件。
The Create method initiates sharing for a server resource. Only members of the Administrators or Account Operators local group or those with Communication, Print, or Server operator group membership can successfully execute Print operator can add only printer queues. The Communication operator can add only communication device queues. The method returns an integer value that can be interpretted as follows: 0 - Successful completion. 2 - The user does not have access to the requested information. 8 - Unknown failure. 9 - The character or file system name is invalid. 10 - The value specified for the level parameter is invalid. 21 - The specified parameter is invalid. 22 - The share name is already in use on this server. 23 - The operation is invalid for a redirected resource. The specified device name is assigned to a shared resource. 24 - The device or directory does not exist. 25 - The share name does not exist. Other - For integer values other than those listed above, refer to Win32 error code documentation.
Create 方法负责为服务器资源启动共享。只有特定人员才能成功地执行 Create 方法，他们包括：管理员组成员，本地组帐户操作员，或那些具有通信、打印、或服务器操作员组成员资格的人员。打印操作员仅能添加打印机队列，通信操作员仅能添加通信设备队列。该方法返回一个整数，其意义分别如下： 0 - 成功完成； 2 - 用户没有访问请求信息的权限； 8 - 出现不明故障； 9 - 字符或文件系统名无效；\10 - 为层次参数指定的值无效； 21 - 指定的参数无效； 22 - 在本服务器上共享名称已使用； 23 - 该操作对重定向资源无效，指定的设备名已被指派给了共享资源； 24 - 设备或目录不存在； 25 - 共享名称不存在； 其他 - 关于上面所列以外的整数值，请参阅 Win32 错误代码文档。
The StartService method places the service in the started returns an integer value of 0 if the service was successfully started, 1 if the request is not supported and any other number to indicate an error.
StartService 方法将服务置于启动状态。如果服务启动成功，它会返回一个 0 值；如果不支持请求，则返回 1；其它数字表示有错。
The SetKeepAliveTime method is used to set how often TCP attempts to verify that an idle connection is still available by sending a Keep Alive packet. If the remote system is still reachable and functioning, it will acknowledge the Keep Alive transmission. Keep Alive packets are not sent by default. This feature may be enabled in a connection by an method returns an integer value of 0 on successful completion, and any other number to indicate an error.
KeepAliveTime 属性用发送保持存在的数据包以确定 TCP 要多久尝试一次验证闲置连接仍旧没有断。如果远程系统仍旧可以连接并正在运行，它就会对保持传输作回应。保持传输数据包不是默认值。这个功能可以由应用程序在连接上启动。该方法在成功完成使返回一个 0 整数值，其它任何数表示错误。
The SetMTU method is used to set the default Maximum Transmission Unit (MTU) for a network interface. The MTU is the maximum packet size (in bytes) that the transport will transmit over the underlying network. The size includes the transport header. Note that an IP datagram may span multiple packets. Values larger than the default for the underlying network will result in the transport using the network default MTU. Values smaller than 68 will result in the transport using an MTU of 68. The method returns an integer value of 0 on successful completion, and any other number to indicate an error.
SetMTU 方法为网络界面改写默认传输单位（MTU）最大值。MTU 是可以用基础网络传输的最大数据包大小。该大小包括传输报头。注意 IP 数据包可能会占用几个数据包。大于基本基本网络的默认只会造成使用网络默认传送 MTU.。值小于 68 会使用 MTU 的 68 传送。该方法在成功完成使返回一个 0 整数值，其它任何数表示错误。
The SetDNSDomain method allows for the setting of the DNS domain. The method returns an integer value of 0 on successful completion, and any other number to indicate an error. This is an instance dependent method call that applies on a per adapter basis. On Windows 2000 the setting applies to the targeted adapter. On NT4 this setting is global.
SetDNSDomain 方法允许 DNS 域的设置。该方法在成功完成使返回一个 0 整数值，其它任何数表示错误。这是一个在每台适配器基础上采用的范例附属方法呼叫。在 Windows 2000 上该设置适用于所需适配器。在 NT4 上这个设置为全局性。
The SetIPUseZeroBroadcast method is used to set IP zero broadcast usage. If this parameter is set to TRUE, then IP will use zeros-broadcasts (0.0.0.0) instead of ones-broadcasts (255.255.255.255). Most systems use ones-broadcasts, but systems derived from BSD implementations use zeros-broadcasts. Systems that use different broadcasts will not interoperate on the same network. Default: FALSE. The method returns an integer value of 0 on successful completion and any other number to indicate an error.
IPUseZeroBroadcast 方法设置是否使用 IP 零广播使用。如果这个参数设置成 TRUE，那么 IP 就会使用零广播（0.0.0.0）而不使用一次广播（255.255.255.255）。大多数系统一次广播，但是某些从 BSD 派生出的系统使用零广播。系统使用在同一网络上的不同广播。默认： FALSE。该方法在成功完成使返回一个 0 整数值，其它任何数表示错误。
The RenewDHCPLeaseAll method renews the IP addresses on all DHCP-enabled network adapters. The lease for the IP address assigned via a DHCP server has an expiration date that the client must renew if it intends to continue use of the assigned IP address. The method returns an integer value of 0 on successful completion, and any other number to indicate an error.
RenewDHCPLeaseAll 方法允许 IP 地址在指定的启动了适配器的 DHCP 上续订。通过 DHCP 服务器指派的 IP 地址租约有到期日期，如果客户希望继续使用该指派的 IP 地址，客户必须续订。 该方法在成功完成使返回一个 0 整数值，其它任何数表示错误。
Assine o Premium para desbloquear milhões de exemplos de tradução, salvar e aprender vocabulário sem limites e usar o serviço sem anúncios.
Palavra e Expressão do Dia
Imagem do dia
Sugestões que contenham returns an integer value
Resultados: 37. Exatos: 37. Tempo de resposta: 17 ms.
