Tradução de voz, recursos offline, sinónimos, conjugação, jogos de aprendizado
Publicidade
Registe-se gratuitamente: aceda a mais resultados e funcionalidades
universal programmer
Tradução de "universal programmer" em chinês
通用编程器
The EMP-31 is an advanced universal programmer that supports digital voltages from 1.8 Volts to 7 Volts and analog voltages (such as VCC) from 0 to 25 volts. The EMP-31 provides near-theoretical programming times for most devices currently available. The EMP-31 is the fastest, most reliable and most versatile programmer in the EMP line. It supports more device types with larger pin counts than the smaller units in the EMP line, and changing Family Modules is not required as often. The socket module on top of the EMP-31 is removable, allowing different modules to be plugged in to accommodate different device packages. This helps eliminate the confusion often caused by third party adapters. The EMP-31 comes standard with a 48-pin DIP Socket Module and thirteen Family Modules. The unit contains three microprocessors, and automatically performs self-test and calibration verification upon power-up.
EMP-31 是高级通用编程器，支持 1.8V 到 7V 的数字电压和 0 到 25V 的模拟电压（如 VCC）。对于目前绝大多数器件，EMP-31 可提供近似于理论上的编程时间。EMP-31 是 EMP 产品线中最快、最可靠和用途最多的编程器。由于它比 EMP 产品线中较小的器件拥有更多的引脚数，所以它可支持更多类型的器件，而不需要经常更换"系列模块"。EMP-31 顶部的插座模块是可以移除的，可以根据不同的器件封装形式插入不同的模块。这样有助于消除经常由第三方适配器造成的干扰。EMP-31 提供 48 引脚双列直插式插座模块和十三个系列模块。该装置含有三个微处理器，加电时自动执行自检和校准。
If single programming speed is slow, the yield is low no matter how many sockets there are. To resolve production problem, Xeltek uses a unique algorithm engine of high-speed CPU and timing of the state machine, to provide a very high speed for reading and writing.SUPERPRO/5000, the latest multi-application intelligent independent and high-speed universal programmer of USB interface, can burn a 512Mb NAND FLASH (K9F1208U0B) only in 67.4 seconds (including programming and verification) Simple.
如果单片烧写速度很慢，插座个数再多整体产能也很低。 西尔特量产解决方案采用了独特的高速CPU加时序状态机的算法引擎，提供了极高的读写速度。 最新的USB接口独立式多用途智能极速通用编程器SUPERPRO/3000U烧写一片32M的FLASH存储器（INTEL 28F320W18）只须13.5秒（含编程和校验） 操作简便。
X Stag's Quasar Plus PC based universal programmer is designed for engineering or production use.
Stag 基于 Quasar Plus PC 的通用编程器专为工程或生产应用而设计。
An economical universal programmer. adopt SUPERPRO/6000's kernel, DIP48 full-driver interface.
经济型通用编程器，采用SUPERPRO/6000最新内核，DIP48全驱动接口。
X Universal programmer with a 40 or 48-pin ZIF socket, controlled from a PC via a USB port or a printer (LPT) port.
X 通用编程器带有40 或48引脚ZIF 插座，通过 USB 端口或者打印机 （LPT） 端口，由电脑控制。
SUPERPRO/580 is an Advanced Compact Universal Programmer which supports more than 7500+ devices and highly versatile.
SUPERPRO/580便携式高级通用编程器，目前已经可支持7500多种芯片.
Product Center:: SUPERPRO/6104N gang programmer, device programmer, chip programmer, programmer, nand flash programmer, Universal Programmer, IC Programmer, FLASH Programmer, PLD Programmer, eMMC Programmer, MCU Programmer, Microcontroller Programmer, BIOS Programmer Xeltek SUPERPRO Programmer
产品中心：：SUPERPRO/6104N 编程器，烧写器，烧录器，量产编程器，量产烧写器，量产烧录器，NAND编程器，NAND烧写器，NAND烧录器，FLASH编程器，FLASH烧写器，FLASH烧录器，PLD编程器，PLD烧写器，PLD烧录器，eMMC编程器，eMMC烧写器，eMMC烧录器，MCU编程器，MCU烧写器，MCU烧录器，单片机编程器，单片机烧写器，单片机烧录器，BIOS编程器，BIOS烧写器，BIOS烧录器 西尔特：：SUPERPRO编程器 烧录器
Assine o Premium para desbloquear milhões de exemplos de tradução, salvar e aprender vocabulário sem limites e usar o serviço sem anúncios.
Sinônimos e analogias para "universal programmer" em inglês
Palavra e Expressão do Dia
Imagem do dia
Sugestões que contenham universal programmer
Resultados: 7. Exatos: 7. Tempo de resposta: 11 ms.
