The board has dual independent outputs, allowing for 3.3v or 5v to be output on each side into the power connections of your breadboard project.
널은 이중 독립적인 산출이 있어, 당신의 밀가루 반죽대 프로젝트의 전원 연결로 각 측에 출력될 3.3v 또는 5v를 허용하.
Each set contains 65/75 male to male breadboard jumper wires
각 세트는 남성 밀가루 반죽대 점퍼 와이어에 65/75명의 남성을 포함합니다
Hidden inside the breadboard are many components.
브레드보드 안에는 많은 부품이 들어 있습니다.
Still, nobody should have to understand a circuit from its breadboard representation; it's really hard.
아직도, 아무도는 그것의 브레드보드 표시에서 회로를 이해 해야 한다; 정말 어렵다.
For 3D breadboard and PCB preview hardware OpenGL is suggested, but not required
3D 브레드 보드 및 PCB 미리보기 하드웨어의 경우 OpenGL이 제안되지만 필수는 아닙니다.
The VoiceBot101 has an Arduino 101 mounted on a custom 3D printed chassis next to a 1/2 size breadboard for additional electronics.
VoiceBot101은, 추가 부품들을 꽂기 위한 1/2 크기 브레드 보드 옆에, 커스텀 3D 프린팅한 섀시에 장착 된 Arduino 101을 갖추고 있습니다.
Using a breadboard allows you to create temporary prototypes and experiment with different circuit designs.
브레드보드를 사용하면 임시 프로토타입을 만들고 다양한 회로 설계를 실험할 수 있습니다.
This breadboard is a traditional white; other colors are also available.
이 밀가루 반죽대는 전통적인 백색이다; 다른 색깔은 또한 유효하다
If you need to fix the breadboard to a place, this can help.
당신이 장소에 밀가루 반죽대를 고칠 필요가 있는 경우에, 이것은 도울 수 있습니다.
Second, you can choose the quantity of breadboard according to the need in the experiment you do.
둘째로, 당신은 당신이 실험에 있는 필요에 따라 밀가루 반죽대의 양을 선택할 수 있습니다.
Use these to jumper between any female headers or between two points on the breadboard.
브레드보드에 어떠한 여성 헤더 사이에 또는 2 점 사이에 점퍼에 이것들을 사용하세요.
As the inner rails and outer rails of the breadboard are connected through the lines, you can directly connect the components without messing with wires or using soldering iron.
밀가루 반죽대의 안 가로장 그리고 외부 가로장이 선을 통해서 연결되는 때, 당신은 철사도 없이 흩뜨리거나 납땜 인두 사용하기 직접 성분을 연결할 수 있습니다.
The breadboard is a little yellow.
밀가루 반죽대는 조금 노랗습니다.