engleză

arabă catalană cehă chineză coreeană daneză ebraică engleză farsi franceză germană greacă hindi italiană japoneză maghiară olandeză poloneză portugheză română rusă slovacă spaniolă suedeză thai turcă ucraineană Vietnamese

chineză

Definiție arabă catalană cehă chineză coreeană daneză ebraică engleză farsi franceză germană greacă hindi italiană japoneză maghiară olandeză poloneză portugheză română rusă slovacă spaniolă suedeză thai turcă ucraineană Vietnamese

Favorite

Publicitate

process the command

Traducere "process the command" în chineză

Nu am putut găsi această intrare. Se afișează rezultate aproximative. Verificați ortografia sau propuneți adăugarea acestui termen în dicționar.

处理命令

If the failure is caused by the transport layer, the terminal shall use "Temporary Problem"("the network currently unable to process the command") as the response,

如果失败是由于传输层的原因导致，终端应该以"临时问题"（"终端目前不能处理命令"）作为响应。

Cannot process the command because of a missing parameter. A command must follow -Command.

无法处理命令，因为缺少参数。命令必须后跟 -Command。

If the call fails and the terminal doesn't make any redial or the redial time exceeds the redial duration, the terminal will use TERMINAL RESPONSE (at present the network can't process the command) to notify UIM, and the radial mechanism will be terminated.

如果呼叫没有成功且终端不再进行任何的重拨操作或者重拨时间超出了UIM规定的重拨持续时间，终端将用TERMINAL RESPONSE（网络目前不能处理命令）通知UIM，且重拨机制应该终止；

Cannot process the command because the -InputFormat parameter requires an argument. Specify a valid format argument for this parameter. Valid formats are: {0}

无法处理命令，因为 -InputFormat 参数需要一个参数。请为此参数指定一个有效格式的参数。有效格式为：｛0｝

If the network doesn't succeed in receiving the SS request, ME sends the TERMINAL RESPONSE command containing the result value"at present the network can't process the command"to the UIM card, and will not send the request again.

若网络没有成功接收SS请求，ME发送含"网络当前不能处理命令"结果值的TERMINAL RESPONSE命令通知UIM卡，并且不再重发请求。

If UIM doesn't request redial, the terminal shall useTERMINAL RESPONSE (at present the network can't process the command) to notify UIM, and will not dial again.

如果UIM没有请求重拨，那么终端应该用TERMINAL RESPONSE（网络目前不能处理命令）通知UIM，并不进行再次呼叫；

Cannot process the command because the value specified with -EncodedCommand is not properly encoded. The value must be Base64 encoded.

无法处理命令，因为使用 -EncodedCommand 指定的值的编码不正确。该值必须为 Base64 编码形式。

If the high priority command is rejected, the terminal shall useTERMINAL RESPONSE to notify UIM (at present the terminal can't process the command"Screen Busy").

如果高优先级命令被拒绝，终端应该使用TERMINAL RESPONSE通知UIM（终端目前不能处理命令-屏幕忙）。

If the network doesn't succeed in receiving the short messageTPDU, MEshall use TERMINAL RESPONSE (at present the network can't process the command) to notify UIM.

如果网络没有成功接收到短消息TPDU，ME应该用TERMINAL RESPONSE（网络目前不能处理命令）通知UIM。

When the terminal receives a command from UIM, it shall process the command right away.

当终端接收到一个来自UIM的命令，它应该马上处理该命令。

Cannot process the command because -WindowStyle requires an argument that is one of Normal, Hidden, Minimized or Maximized. Specify one of these argument values and try again.

无法处理此命令，因为 -WindowStyle 需要一个参数，该参数为 Normal、Hidden、Minimized 或 Maximized 之一。请指定上述参数值之一，然后重试。