engleză

arabă catalană cehă chineză coreeană daneză ebraică engleză farsi franceză germană greacă hindi italiană japoneză maghiară olandeză poloneză portugheză română rusă slovacă spaniolă suedeză thai turcă ucraineană Vietnamese

chineză

Definiție arabă catalană cehă chineză coreeană daneză ebraică engleză farsi franceză germană greacă hindi italiană japoneză maghiară olandeză poloneză portugheză română rusă slovacă spaniolă suedeză thai turcă ucraineană Vietnamese

Favorite

Publicitate

transact-sql programming

Exemple pentru "transact-sql programming"

Nu am putut găsi această intrare. Se afișează rezultate aproximative. Verificați ortografia sau propuneți adăugarea acestui termen în dicționar.

transact

交易办理处理谈妥并成交

sql

SQL

programming

编程方案拟订方案编制方案规划节目

Remote Monitoring, Datalogging, Programming Software Esco Voyager is a PC-based software package developed for the remote monitoring, data logging, and programming/ device configuration of Esco controlled environment laboratory equipment.

Voyager远程监控，数据记录，程序设计软件 Esco Voyager是专为Esco实验室设备的远程监控、数据记录和编程/设备配置设计的一款基于个人电脑的软件包。

One use case of data transfer between any ECU and any D-server is the programming/(partial) reprogramming of ECUs, called "ECU memory programming".

任何ECU与任何诊断服务器之间数据传输的一个用例是ECU的编程／（部分）重新编程，被称为"ECU存储器编程"。

The MasterBlaster Serial/USB Communications Cable is a download cable that allows PC and workstation users to program and configure devices in-system. The MasterBlaster cable provides multidevice JTAG chain configuration and programming support for SRAM-based devices, such as APEX 20K and Mercury Devices, EEPROM-based devices, such as MAX 3000 and MAX 7000 devices, and configuration devices, such as the EPC2 and EPC16. You can also use the MasterBlaster cable to run SignalTap II logic analysis. The MasterBlaster cable also provides multidevice Passive Serial chain configuration support for SRAM-based devices, such as APEX 20K and Mercury devices. This cable can be used in 2.5-, 3.3-, and 5.0-V systems. Installation The MasterBlaster communications cable connects a circuit board to the USB (Windows 2000 and Windows XP only) or RS-232 serial port (called a COM port on a PC) on a PC, UNIX, or Linux 10-pin female plug for the cable connects to a 10-pin male header on the circuit board that contains the target device(s).Programming or configuration data can be downloaded from the serial or USB port, using the Quartus II Programmer through the MasterBlaster cable to the circuit board.

MasterBlaster？串行/USB 通信线缆是一种下载线缆，可使电脑和工作站用户对设备进行系统内编程和配置。MasterBlaster？线缆提供多设备 JTAG 链配置和编程支持，用于基于 SRAM 的设备（如 APEX？ 20K 和 Mercury？设备）、基于 EEPROM 的设备（如 MAX？ 3000 和 MAX 7000 设备）和配置设备（如 EPC2 和 EPC16）。您也可使用 MasterBlaster？线缆运行 SignalTap？ II 逻辑分析。MasterBlaster？线缆还提供多设备无源串行链配置支持，用于基于 SRAM 的设备（如 APEX 20K 和 Mercury 设备）。此线缆可用于 2.5、3.3 和 5.0-V 系统。安装：MasterBlaster？通信线缆将电路板连接到电脑、UNIX 或 Linux 工作站上的 USB（仅 Windows 2000 和 Windows XP）或 RS-232 串行端口（在电脑上称为 "COM" 端口）。线缆的 10 针母头与包含目标设备的电路板上的 10 针公头连接。可使用 Quartus？ II 编程器将程序或配置数据通过 MasterBlaster？线缆下载到电路板上。

Factory programming will load all standard features and customer-specified options per the default settings. Customer Programing

工厂编程将按照默认设置载入所有标准功能和客户指定的选项。

Plus: Experience in ACM or programing contest, independent development of operating system or designing programming language, github account, etc

ACM或编程比赛经验有加分，有自主开发操作系统或设计编程语言的经验有加分

We use Programming System Device (PSD) in the bill acceptor and realize In-Application Programing (IAP) and fault self-diagnosis in it so as to make its remote upgrade and diagnosis available.

我们在多国货币识别接收器中使用了可编程系统器件（PSD），实现了在应用中编程（IAP）功能和故障自诊断功能，使其支持远程升级和诊断；

SmartNode is an online graphical progamming tool based on Node-Red, targeted for entry-level smart hardware developers. SmartNode is user-friendly and is quite easy to use. You do not need to download any software. All you need is a development board that supports SmartNode. Programming is divided into 4 steps

Smart Node是创客大爆炸针对没有开发经验的智能硬件开发者，在Node-Red的基础上开发的一款在线图形化编程工具。Smart Node的操作流程极其简单。开发人员不需要下载程序，只需要支持Smart Node的开发板，就能开始对智能硬件进行设计开发。编程流程分为拖拽所需功能（drag&drop）、配置（configure）、连接（link）、运行（done）4步，在输入相关参数的基础上，将各功能模块按照逻辑连接在一起，通过部署让程序在开发板上运行，基本的硬件模型就可以完成。