Immediately after the bootstrap loader is disconnected, the processor begins running the program.
ブートストラップローダが切断されると直ちに、プロセッサはプログラムの実行を開始します。
The bootstrap loader has a list of places to look for a boot sector.
ブートストラップローダには、ブートセクタを探すべき場所のリストが収められている。
Returns a string containing the contents of a customized bootstrap loader (stub) that allows the created Phar archive to work with or without the Phar extension enabled.
独自の起動ローダー (スタブ) を文字列で返します。 これを用いて作成した Phar アーカイブは、Phar 拡張モジュールが有効になっていない環境でも実行することができます。
Phar archives contain a bootstrap loader, or stub written in PHP that is executed when the archive is executed in PHP either via include
PHP でかかれた起動ローダー (スタブ) を含む Phar アーカイブをPHP から実行するには、次のようにそれをインクルードするか、
The information describing the secondary bootstrap loader (its size and offset) is given in the first 512 byte block.
2 番目のブートストラップローダの情報(大きさとオフセット)はブロックの先頭から512 バイトに収められています。
The bootstrap loader software measures the length of the high and low spaces within that character to determine the baud rate of the host system.
ブートストラップローダのソフトウェアはその文字の中のハイとローのスペースの長さを測定して、ホストシステムのボーレートを決定します。
Once the bootstrap loader has been invoked and the baud rate calculated, the device will transmit a sign-on banner identifying the device.
ブートストラップローダがいったん、呼び出され、ボーレートが計算されると、デバイスはデバイスの識別用の登録用フラグ(Sign-on banner)を送信します。
Because the bootstrap loader completely controls the loading of the program into NV SRAM, we encrypted the address and data bus with a 40-bit or 80-bit encryption key.
ブートストラップローダがNV SRAMへのプログラムローディングを完全に制御するので、40ビットまたは80ビットのエンクリプションキーを使いアドレスおよびデータバスにエンクリプションしました。
A ROM-resident bootstrap loader downloads program and data directly to the microcontroller, allowing fast debugging or field upgrades.
ROM常駐のブートストラップローダがプログラムとデータを直接マイクロコントローラにダウンロードするので、迅速なデバグまたはフィールドアップグレードが可能です。
Debugging Communication Problems The following are a list of the most common problems encountered while communicating with the microcontroller via the bootstrap loader.
通信の問題をデバッグする 以下に示す内容はブートストラップローダ経由でマイクロコントローラと通信を行う場合に起こる最も一般的な問題のリストです。
This autobaud feature allows the bootstrap loader to communicate with a number of host systems without being limited to a fixed baud rate.
この自動速度調整機能はブートローダが固定のボーレートに制限されることなく、多数のホストシステムと通信することができます。
After first performing a few basic hardware tests, the bootstrap loader loads and passes control to a larger loader program, which typically then loads the operating system.
基本ハードウェア テストをいくつか最初に実行すると、ブートストラップ ローダーは、より大きなローダーを読み込んでそれに制御を渡します。通常、その制御を渡されたローダーがオペレーティング システムを読み込みます。
The simple bootstrap loader interface permits several ways to communicate between the PC and target microcontroller.
ブートストラップローダインタフェースは単純なので、PCとターゲットのマイクロコントローラとの間の通信を行うために幾つかの方法が許されます。