In addition, diffraction patterns cannot be obtained in regions within a small diffraction angle range owing to experimental restrictions, and the conventional calculation algorithm used for image reconstruction cannot reconstruct the images in some cases.
In the diffraction pattern obtained from this sample (b, right), a diffraction pattern with a high intensity is observed for a diffraction angle more than twofold larger than that in the case of the diffraction pattern with the bacterium alone (b, left).
A nickel based compound positive electrode material primary cell, which uses a positive electrode active material comprising particles of a nickel oxyhydroxide based compound which have an eutectic structure formed with zinc, cobalt or both of these, have a surface coated with a higher order oxide of cobalt, and exhibit a half width of a diffraction peak having a diffraction angle near to 18 degree of 0.4 to 0.48 in its X-ray diffraction primary cell combines improved capacity and excellent high rate characteristics.
The X-ray diffractometer examines samples through detection of a diffraction angle *2 unique to asbestos, while the phase-contrast microscope determines the morphology and refractive index of asbestos.
There is further provided a conductive paste containing a binder resin and a conductive filler, characterized in that the conductive filler partially or wholly consists of silver powder (B) wherein with respect to the peak appearing at a diffraction angle of 38.05º in X-ray diffraction-reflection measurement, the half-value width thereof is 0.31 or less.
Also provided is a lithium composite metal oxide which contains lithium, nickel, and M (wherein M represents one or more transition metal elements selected from the group consisting of manganese, cobalt, and iron), characterized in that in X-ray powder diffractometry with a CuKa line in the diffraction angle 2ϑ range of 10-90º, the lithium composite metal oxide gives an X-ray powder diffraction pattern having a diffraction peak (diffraction peak A) in the 2ϑ range of 20-23º.
At least one of the optical function surfaces on the incidence side and the emission side is equipped with a diffraction section that fulfills at least one of the following formulas (1) and (2) when the diffraction angle of a beam with a diffraction order reaching maximum diffraction efficiency is set as θ1 on the wavelength (λ1) and the diffraction angle of a beam with a diffraction order reaching maximum diffraction efficiency is set as θ2 on the wavelength (λ2).
Disclosed is a process for producing a plasma display panel in which a protective layer (9) of a front plate (2) is constituted of a metal oxide formed from at least two oxides selected from magnesium oxide, calcium oxide, strontium oxide, and barium oxide and the metal oxide, in analysis by X-ray diffraction, has a peak present between the minimum diffraction angle and maximum diffraction angle which are attributable to the individual oxides that constitute specific-orientation planes of the metal oxide.
The concentration of calcium contained in the underlayer is from 1 atomic% to 5 atomic% with respect to the underlayer, and in X-ray diffraction analysis of the underlayer surface, for the metal oxides, a single peak exists between the minimum diffraction angle and the maximum diffraction angle produced by a single metal oxide on the specifically-oriented (111) surface.
In the X-ray diffraction analysis in the protective layer plane, the metal oxide has a peak between the diffraction angle at which the peak of magnesium oxide occurs and the diffraction angle at which the peak of calcium oxide in the same orientation as the peak of magnesium oxide occurs.
Regarding the metal oxide, the X-ray diffraction analysis of the surface of the substrate film shows a peak between a minimum diffraction angle and a maximum diffraction angle derived from a simple substance of the oxide constituting the metal oxide in a specific plane direction.
The green phosphor contains a host crystal containing Sr, Ga, and S and a luminescent center, and is characterized in that, in an XRD pattern, the ratio of the diffraction intensity of a maximum peak appearing at a diffraction angle 2θ = 14˚ to 20˚ to the diffraction intensity of a maximum peak appearing at a diffraction angle 2θ = 21˚ to 27˚ is not less than 0.4.
The diffraction angle peak of the metal oxide particles (93) in X-ray diffraction analysis for a specific orientation plane is in between, among two of the metal oxides contained in the metal oxide particles, the diffraction angle peaks of one the metal oxides in X-ray diffraction analysis for a specific orientation plane, and the diffraction angle peak of another metal oxide in X-ray diffraction analysis for a specific orientation plane.
Exemplele au rolul de a te ajuta să traduci cuvinte sau expresii corect si adaptat la context. Nu sunt selectate sau validate manual, așadar pot conține termeni inadecvați. Te rugăm să raportezi exemplele pe care le consideri inadecvate. Traducerile vulgare sau colocviale sunt în general marcate cu roșu sau cu portocaliu.