There are some cool features of the frame buffer devices, in that you can give generic options to the kernel at boot up-time, including options specific to a particular frame buffer device.
Note that this driver will only probe for the Trantor T130B in its default configuration; you might have to pass a command line option to the kernel at boot time if it doesn't detect your card.
You might as well try it out. Note that this driver will only probe for the Trantor T130B in its default configuration; you might have to pass a command line option to the kernel at boot time if it doesn't detect your card.
This setting can be overridden by passing the "mcd=" parameter to the kernel at boot time (or at module load time if you said M to "Standard Mitsumi CDROM support").
For example each file system built into the kernel registers itself with the kernel at boot time or, if you are using modules, when the file system is first used.
To use different parallel ports for the printer and the PLIP cable, you can say Y to this printer driver, specify the base address of the parallel port(s) to use for the printer(s) with the "lp" kernel command line option. (See the documentation of your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.
2)プリンタと PLIP ケーブルが違うパラレルポートに接続される場合,ここでは Y と答えてプリンタドライバをカーネルに組みこみ,プリンタが接続されているパラレルポートのベースアドレスをカーネルのコマンドラインオプションの "lp" を使って指定します(起動時にカーネルに与えるオプションの指定法についてはお使いのブートローダー(lilo か loadlin)のドキュメントを読んで下さい.
To use different parallel ports for the printer and the PLIP cable, you can say Y to the printer driver, specify the base address of the parallel port(s) to use for the printer(s) with the "lp" kernel command line option. (See the documentation of your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.
In the new 2.2 kernel, you must specifically enable IP forwarding in the kernel at boot up.
新しい 2.2 カーネルでは、起動時にカーネルの中で IP フォワーディングを特に有効にする必要があります。
A compilation of all the possible boot time arguments that can be passed to the Linux kernel at boot time.
起動時に Linux カーネルに渡すことができるブートタイム引数をすべて網羅した文書。
Key Knowledge Areas: Provide common commands to the boot loader and options to the kernel at boot time.
主な知識分野: 起動時に共通のコマンドをブートローダに提供し、オプションをカーネルに提供する。
NOTE: these CDROM drives will not be auto detected by the kernel at boot time; you have to provide the interface address as an option to the kernel at boot time as described in Documentation/cdrom/cdu31a or fill in your parameters into drivers/cdrom/cdu31a.c.
Exemplele au rolul de a te ajuta să traduci cuvinte sau expresii corect si adaptat la context. Nu sunt selectate sau validate manual, așadar pot conține termeni inadecvați. Te rugăm să raportezi exemplele pe care le consideri inadecvate. Traducerile vulgare sau colocviale sunt în general marcate cu roșu sau cu portocaliu.