Nu am putut găsi această intrare. Se afișează rezultate aproximative. Verificați ortografia sau propuneți adăugarea acestui termen în dicționar.
基準電圧値
The transimpedance amplifier (30) permits the voltage values successively outputted from the pre-hold circuits (201-20N) to be inputted as current, and outputs a voltage value which is obtained by converting the current flowing corresponding to the change quantity from a reference voltage value to the input voltage value by the transimpedance.
When a kick start is performed, the first switch (17) is set to the OFF state and it is switched to the ON state when the measured voltage has reached the reference voltage value.
The DC-DC converter (200i) is provided with a DC bus voltage target-value calculation unit (202i) that calculates a DC bus voltage target-value from the target current values and the DC bus reference voltage value, a current limit value calculation unit (205i) that calculates a current limit value from the target current values, etc., and a DC bus voltage control unit (203i) that controls the DC bus voltage using the DC bus voltage target-value.
A power supply circuit device (1) is provided with a reference voltage setting circuit (3) for setting a reference voltage value, and a power supply voltage supply circuit (2) wherein an output voltage value changes to be within the reference voltage value.
On the other hand, the adjustment section (104), if the number of judgments that the voltage value of the output signal is lower than the reference voltage value is more than the number of judgments that the voltage value of the output signal is higher than the reference voltage value, adds a negative value to the to the digital value thereof.
An adjustment section (104), if the number of judgments that the voltage value of the output signal is higher than the reference voltage value is more than the number of judgments that the voltage value of the output signal is lower than the reference voltage value out of the results of the k number of judgments by the judgment section (103), adds a positive value to the digital value of the storage section (101).
This adjustment of the voltage values of the higher and lower voltage ends of the reference voltage value allows the gain of the analog to digital conversion to be changed.
The measuring device includes: a comparator for successively comparing a voltage value of the signal to be measured with a given reference voltage value at a timing of a successively given strobe signal; a strobe timing generator for successively generating strobe signals arranged at a substantially identical interval; a capture memory for storing a comparison result of the comparator; and a digital signal processing unit for calculating a jitter of the signal to be measured, according to the comparison result stored in the capture memory.
The gradation variance determination circuit (33) determines whether or not the generated gradation voltage value falls within a permissible range for the variance relative to a reference voltage value supplied from an external semiconductor testing device (tester) (32), and the determination result is output to the semiconductor testing device (32).
The present invention includes a weighting function setting step, wherein a weighting function (504) is set on the basis of the amount of deviation in the impedance of a control subject (503), and a transfer function determination step, wherein the transfer function for a power controller (103) is determined, said transfer function comprising an internal model transfer function (501) obtained by performing a Laplace transformation on a reference voltage value, and a partial controller transfer function (502) which receives the output from the internal model transfer function (501) and computes a control output.
The reference voltage setting circuit (3) controls to set, in the case of changing the output voltage value of the power supply voltage supply circuit (2) from a first voltage value to a second voltage value, the reference voltage value to a third voltage value, wherein the reference voltage value is higher than the second voltage value when the second voltage value is higher than the first voltage value, and the reference voltage value is lower than the second voltage value when the second voltage value is lower than the first voltage value, then, reset the reference voltage value to the second voltage value.
This direct current power supply circuit includes: an alternating current power supply; a rectifying circuit that generates a direct current voltage from a supply from the alternating current power supply; a charging switch, which has an input terminal thereof connected to the rectifying circuit, and which outputs an output voltage corresponding to an input value inputted to a control terminal; a capacitor and a control circuit, which are connected to an output terminal; and a charging switch control circuit, which generates a switch-on signal when the output voltage is equal to or lower than a first reference voltage value, and which generates a switch-off signal when the output voltage is equal to or higher than a second reference voltage value, said second reference voltage value being higher than the first reference voltage value.
Exemplele au rolul de a te ajuta să traduci cuvinte sau expresii corect si adaptat la context. Nu sunt selectate sau validate manual, așadar pot conține termeni inadecvați. Te rugăm să raportezi exemplele pe care le consideri inadecvate. Traducerile vulgare sau colocviale sunt în general marcate cu roșu sau cu portocaliu.