With release 14 and prior, initialization of the CX series arrays was performed exclusively by setting up a serial PPP session with each of the storage processors and setting the network parameters.
The storage processors will need to reboot for the settings to take effect and if there are any network conflicts such as duplicate IP addresses the reboots of the storage processors may fail.
When a storage processor is connected to a LAN, it will try to connect to these addresses, which can lead to network errors depending on the security settings of the network the SP is on.
In the Storage Processor Network Configuration setup screen that appears, specify the following for the SP you are connected to
SPのネットワーク構成のセットアップ画面で、接続先のSPについて以下の情報を指定します。
Verify Storage Processor Network Configuration
ストレージ・プロセッサのネットワーク構成の確認
The SAN Copy port will be identified by the storage system name rather than the Storage Processor network name, the owning Storage Processor, and also the port's World Wide Name.
SAN Copyポートは、SPネットワーク名、所有元SP、ポートのWWN(World Wide Name)ではなく、ストレージ・システム名によって識別されます。
Conținut posibil inadecvat
Exemplele au rolul de a te ajuta să traduci cuvinte sau expresii corect si adaptat la context. Nu sunt selectate sau validate manual, așadar pot conține termeni inadecvați. Te rugăm să raportezi exemplele pe care le consideri inadecvate. Traducerile vulgare sau colocviale sunt în general marcate cu roșu sau cu portocaliu.