Reference Test Load: Load or condition in which the output of the UPS delivers the active power (W) for which the UPS is rated.
Referentie-testbelasting: belasting of voorwaarde waarin de output van de UPS het actieve vermogen (W) levert waarvoor de UPS gespecificeerd is.
n % is the efficiency at the particular n % of the Reference Test Load, as measured according to the ENERGY STAR Test Method.
n %: de efficiëntie in de specifieke n % van de referentietestlading, als gemeten overeenkomstig de ENERGY STAR-testmethode.
Proportion of Time Spent at Specified Proportion of Reference Test Load, tn
Gedeelte van de tijd doorgebracht in de specifieke n % van de referentietestlading (tn %)
tn % is the proportion of time spent at the particular n % of the Reference Test Load, as specified in the loading assumptions in Table 1, and
tn %: gedeelte van de tijd doorgebracht in de specifieke n % van de referentietestlading, als gespecificeerd wat de veronderstelde last betreft in tabel 1, en
The measured input power factor of all Ac-output UPSs at 100 percent of the Reference Test Load shall be greater than or equal to the Minimum Power Factor Requirement specified in Table 6 for all VFI and VI Normal Modes required for qualification.
De gemeten input-vermogenscoëfficiënt van alle UPS-systemen met wisselstroom-output bij 100 procent van de referentietestbelasting moet minimaal gelijk zijn aan de eis betreffende de minimale vermogenscoëfficiënt als gespecificeerd in tabel 6 voor alle normale VFI- en VI-modi die vereist zijn voor kwalificatie.
Conținut posibil inadecvat
Exemplele au rolul de a te ajuta să traduci cuvinte sau expresii corect si adaptat la context. Nu sunt selectate sau validate manual, așadar pot conține termeni inadecvați. Te rugăm să raportezi exemplele pe care le consideri inadecvate. Traducerile vulgare sau colocviale sunt în general marcate cu roșu sau cu portocaliu.