This measurement is also referred to as the tire's section width.
Esta medida también se conoce como ancho de sección del neumático.
The lower the figure, the greater a tire's section width.
Cuanto más baja es la cifra, mayor es el ancho de sección de un neumático.
Because a tire's section width is influenced by the width of the rim upon which the tire is mounted, the correct industry assigned measuring rim width for the tire size being measured must be used.
Debido a que el ancho del neumático (section width) es influenciado por el ancho del rin en que se monta, debe utilizarse el rin con la medida ancho del rin de la industria, para obtener los valores correctos del tamaño del neumático.
The industry rule of thumb is that for every 1/2" change in rim width, the tire's section width will correspondingly change by approximately 2/10".
La regla empírica de la industria, indica que por cada 1/2 pulgada de cambio en el ancho del rin, el ancho del neumático cambiará aproximadamente 2/10 de pulgada.
The second pair of numbers (225/45R17) is the tire's aspect ratio or profile. This percentage represents the ratio of the sidewall's section height to the tire's section width.
El segundo par de números (225/45R17) representa la serie o perfil (la relación entre la altura del flanco y el ancho del neumático).
This identifies the tire's Section Width (cross section) in millimeters.
Esto identifica el ancho del neumático (en sección transversal) en milímetros.
Conținut posibil inadecvat
Exemplele au rolul de a te ajuta să traduci cuvinte sau expresii corect si adaptat la context. Nu sunt selectate sau validate manual, așadar pot conține termeni inadecvați. Te rugăm să raportezi exemplele pe care le consideri inadecvate. Traducerile vulgare sau colocviale sunt în general marcate cu roșu sau cu portocaliu.