Stack the sheets of plywood and drill t-nut holes for three or four sheets at a time.
Apile las hojas de madera contrachapada y taladre orificios de tuerca en T para tres o cuatro hojas a la vez.
They can offer higher retention than a standard T-Nut.
Pueden ofrecer mayor retención que una tuerca en T estándar.
Take the added precaution to plug the t-nut holes.
Tome la precaución adicional para tapar los orificios de la tuerca t.
Drill the t-nut holes (but don't install the t-nuts yet).
Taladre los agujeros de tuerca t (pero no instale las tuercas t todavía).
One lesson learned, when drilling the t-nut holes is to put the climbing side up, and drill down into the wood.
Una lección aprendida, al taladrar los agujeros de la tuerca T es levantar el lado de la escalada y profundizar en la madera.
If your plywood is on the frame when you try to install the t-nut it will bounce and won't easily go into the hole.
Si su madera contrachapada está en el marco cuando intenta instalar la tuerca t, rebota y no entrará fácilmente en el orificio.
If a t-nut isn't seated squarely the back surface of the hold won't sit flush with the plywood panel.
Si una tuerca t no está asentada en escuadra, la superficie posterior de la bodega no se asentará al ras del panel de madera contrachapada.
Here's a way to tighten the t-nut using a drill and a 3/8 threaded rod.
Aquí hay una manera de apretar la tuerca t con un taladro y una varilla roscada de 3/8 .
Golf Ts are cheap and can be obtained easily in large numbers and work well to plug the t-nut hole, and can be removed easily when done.
Los Golf Ts son baratos y se pueden obtener fácilmente en grandes cantidades y funcionan bien para taponar el agujero de la tuerca t, y se pueden quitar fácilmente cuando estén listos.
Make sure you seat the T-nut square with the plywood panel.
Asegúrese de asentar el cuadrado de tuerca en T con el panel de contrachapado.
This nuts can offer higher retention than a standard T-Nut when we insert them to the connected materials
Estas tuercas pueden ofrecer una mayor retención que una tuerca en T estándar cuando las insertamos en los materiales conectados
Tighten the T-nut against the back of the panel until until it is tight, then just reverse the drill to remove the threaded rod.
Apriete la tuerca en T contra la parte posterior del panel hasta que quede apretada, luego simplemente invierta la broca para quitar la varilla roscada.
Then, insert the threaded rod through the t-nut hole and turn it until the threads catch.
Luego, inserte la varilla roscada a través del orificio de la tuerca en T y gírela hasta que las roscas se enganchen.