The ifport command can be used to check or set the current transceiver type.
Make sure that the transceiver type reported in the system log matches your connection.
Asegúrese de que el tipo de transceptor que aparece en el registro del sistema concuerda con su conexión.
This can either be a numeric value, or a keyword identifying the transceiver type.
Esto puede ser, ya sea un valor numérico como en las versiones anteriores de PCMCIA, o una palabra clave que identifique el tipo de transceptor.
This transceiver type is also used with direct-attach breakout cables to adapt a single 100GbE port to four independent 25 gigabit ethernet ports (QSFP28-to-4x-SFP28).
Este tipo de transceptor también se utiliza con cables de conexión directa para adaptar un solo puerto de 100 GbE a cuatro puertos independientes de 25 gigabit ethernet (QSFP28-a-4x-SFP28).
Sometimes this transceiver type is also referred to as "QSFP100" or "100G QSFP" for sake More
A veces, este tipo de transceptor también se conoce como "QSFP100" o "100G QSFP" por motivos de simplicidad.
With IBM CCAE and Socket EA cards, the transceiver type (10base2, 10baseT, AUI) needs to be set when the network device is configured.
Con las tarjetas IBM CCAE y Socket EA, el tipo de transceptor (10base2, 10baseT, AUI), necesita configurarse cuando el dispositivo de red está configurado.
Some Linksys, D-Link, and IC-Card 10baseT/10base2 cards have a unique way of selecting the transceiver type that isn't handled by the Linux drivers.
Algunas tarjetas Linksys, D-Link, e IC-Card 10baseT/10base2 tienen una forma única de seleccionar el tipo de transceptor que no es manejado por los controladores de Linux.
This transceiver type is specifically optimized for transport of serial data at 10.3125Gbps.