Loosen screws (b) using a phillips screwdriver (+).
Quite los tornillos (b) utilizando un destornillador Phillips (+) y extráigalos.
Tighten up the screws of the lamp lid using a phillips screwdriver (+).
Quite los tornillos (a) utilizando un destornillador Phillips (+) y extráigalos.
Tighten the four front cover screws using a Phillips screwdriver.
Instale la cubierta delantera izquierda con tres tornillos usando un destornillador Phillips.
Using a phillips screwdriver remove the air filter cover.
Usando un destornillador Phillips retire la cubierta del filtro de aire.
Remove the cutting head then using a phillips screwdriver, remove the 4 screws in the product housing shown in figure 4.
Retire la cabeza de corte utilizando un destornillador phillips, retire los 4 tornillos en la caja del producto que se muestra en la figura 4.
Loosen the screws of the lamp lid on the top cover using a phillips screwdriver (+), and remove the lid.
Quite los tornillos de la tapa de la lámpara de la parte superior de la cubierta (a) utilizando un destornillador Phillips (+), y retire la tapa.
Tighten up the screws of the lamp lid using a phillips screwdriver (+).
Afiance los tornillos de la tapa de la lámpara utilizando un destornillador Phillips (+).
Loosen the screws of the lamp lid (a) using a phillips screwdriver (+), and remove the lid. Remove the lamp cover in the direction of the arrow as indicated. 5.
Quite los tornillos de la tapa de la lámpara de la parte superior de la cubierta (a) utilizando un destornillador Phillips (+), y retire la tapa. Quite la cubierta de la lámpara en la dirección indicada por la flecha.
Using a Phillips screwdriver, remove the three screws on the faceplate.
Con un destornillador Phillips, retire los tres tornillos de la cubierta frontal.
Loosen but do not remove the seven screws securing the shield to the base using a Phillips screwdriver.
Afloje pero no retire los siete tornillos que sujetan la protección a la base utilizando un destornillador Phillips.
d Using a Phillips screwdriver, tighten the captive screw.
10 Con un destornillador Phillips del n.º 2, apriete los tornillos de retención del disipador de calor.
Conținut posibil inadecvat
Exemplele au rolul de a te ajuta să traduci cuvinte sau expresii corect si adaptat la context. Nu sunt selectate sau validate manual, așadar pot conține termeni inadecvați. Te rugăm să raportezi exemplele pe care le consideri inadecvate. Traducerile vulgare sau colocviale sunt în general marcate cu roșu sau cu portocaliu.