Advertising
Register for free: access more results and features
automatic repeat
Definition
Translation of "automatic repeat" in Chinese
Definition NEW
自动重传
自动重发
Minutes set arbitrary), automatic repeat this process, to avoid long-term
分钟任意设定 ） ， 此过程自动重复运行，可避免长期
An alternate approach for error control is hybrid automatic repeat request (HARQ), which is a combination of ARQ and error-correction coding.
用于替代错误控制的一种方案是混合式自動重送請求（HARQ），它是ARQ与错误纠正编码的组合。
ARQ and FEC may be combined such that minor errors are corrected without retransmission, and major errors are corrected via a request for retransmission: this is called hybrid automatic repeat request (HARQ).
ARQ与FEC可以组合，使得不需重传就纠正微小错误，并经由重传请求校正大的错误，这被称为混合式自動重送請求（HARQ）。
This is known as automatic repeat request (ARQ), and is most notably used in the Internet.
这也称之为自动重传请求（ARQ），它在互联网中极为常用。
LTE implements fast retransmission mechanisms: automatic repeat requests (ARQ) and hybrid ARQ (HARQ) mechanisms at physical layer (PHY) and medium access control (MAC) layers, which requires fast re-ordering at the receiver.
LTE实施快速重传机构：在物理层（PHY）和媒体存取控制（MAC）层采用自动重复请求（ARQ）和混合ARQ （HARQ）机构，这要求在接收机上快速重排序。
CAN bus, ALOHAnet, Ethernet, etc., all experience occasional bus contention in normal operation, but use some protocol (such as Multiple Access with Collision Avoidance, carrier-sense multiple access with collision detection, or automatic repeat request) to minimize the times that contention occurs, and to re-send data that was corrupted in a packet collision.
CAN总线、ALOHAnet、以太网等在正常运作中偶尔会遇到总线争用，但会使用一些协议（例如避免碰撞的多路访问（英语：Multiple Access with Collision Avoidance）、具有碰撞检测的载波侦听多路访问、自动重发请求）最小化争用时间，并重新发送在数据包冲突（英语：Packet collision）中被破坏的数据。
Automatic repeat request schemes may be used to retransmit lost or corrupted data.
自动重发请求方案可用于重新传输丢失或损坏的数据。
Error correction may generally be realized in two different ways: Automatic repeat request (ARQ) (sometimes also referred to as backward error correction): This is an error control technique whereby an error detection scheme is combined with requests for retransmission of corrupted data.
错误纠正通常可以用两种方式实现： 自动重传请求（ARQ），有时也称后向纠错：这是一种错误控制技术，其中将错误检测方案与重传错误数据的请求组合。
Automatic repeat request (ARQ) schemes have been widely applied to many digital communication systems, especially, computer communication networks...
自动请求重传 （ARQ） 方法已经在许多数字通信系统特别是通信网中获得了广泛的应用。
Applications that require low latency (such as telephone conversations) cannot use Automatic Repeat reQuest (ARQ); they must use forward error correction (FEC).
需要低延迟的应用程序（如电话通话）不能使用ARQ；它们必须使用前向錯誤更正（FEC）。
The first determining module is configured for determining whether hybrid automatic repeat request acknowledgement information and the determined channel state information to be detected should be included in the information transmitted on physical uplink control channel for transmitting hybrid automatic repeat request acknowledgement information
Hybrid ARQ technology is the combination of FEC (forward error correction) and ARQ (automatic repeat request).
混合ARQ（HARQ） 技术是前向纠错和检错重发方式的结合。
Synonyms and analogies of "automatic repeat" in English
Word & Expression of the day
Image of the day
Suggestions that contain automatic repeat
Results: 13. Exact: 13. Elapsed time: 27 ms.
