This paper introduces the major procedure of transplanting the finite element analysis program of two dimensional elastoplastic fracture mechunics on the microcomputer of IBM-PC/XT which is taken as the object computer.
本文介绍了以IBM-PC/XT微机为目标机,移植二维弹塑性断裂力学的有限元分析程序的主要过程。
The mechanism of jump out of threaded casing connection is researched by using a finite element analysis program (ADINA).
用有限元程序ADINA对圆螺纹套管接头的滑脱机理进行了研究。
ADINA - Finite element analysis program.
有限元分析-上海荧沃光电
ANSYS - Finite element analysis program.
有限元分析 灯具热分析
Other results
Winding Expert has a module for export of all necessary data to any Finite Element Analysis (FEA) program, which is necessary for the calculation and analysis of the mechanical properties of the filament winded products.
NASTRAN is a finite element analysis (FEA) program that was originally developed for NASA in the late 1960s under United States government funding for the aerospace industry.
Engineer's Studio(R) Engineer's Studio(R) is the 3D Finite Element FEM analysis program developed in-house from pre-processing, calculation engine, to post-processing. The parts of structure can be modeled with plate elements and the non-linear behavior of structure can be analyzed.
A complete program, based on a finite element analysis, allows tooth proportion improvement increasing the life of the gearing.
一项已经完成的以有限元分析为基础的项目能够对齿的比例进行改善,从而延长了齿轮的工作寿命。
Finally, by using ANSYS program nonlinear element analysis is carried out.
最后,利用ANSYS有限 元程序进行了非线性有限元分析。
The plane strain finite element analysis of soil-anchored steel sheet piles is based on calculating program, and completed by adding relevant function module and modifying defects.
All programs are based on Boundary Element analysis (BEM) solver that means fields can be calculated anywhere else in the "world".
所有的程序基于边界元分析器,这意味着可以在世界上任何其他地方计算各种场问题。
A nonlinear finite element analysis of RC deep flexural simply supported beams with the program VTis presented.
摘要使用基于扰动应力场模型的非线性有限元程序VT2分析了4个深受弯简支梁的受力性能。
In this paper, the Finite Element Analysis model of the U-shape bellows is presented and calculated by the ANSYS program.
本文建立了U形无加强波纹管结构分析的有限元分析模型,并采用有限元软件ANSYS对其进行了计算。
Potentially sensitive or inappropriate content
Examples are used only to help you translate the word or expression searched in various contexts. They are not selected or validated by us and can contain inappropriate terms or ideas. Please report examples to be edited or not to be displayed. Potentially sensitive, inappropriate or colloquial translations are usually marked in red or in orange.