Support for remote network controller upgrade version, no need to replace the internal chip, improve the system upgrade and repair service efficiency.
支持远程网络控制器的版本升级,不需要更换内部芯片,提高了系统升级和维修的效率。
A wireless communication system mainly comprises network entities such as a mobile terminal (terminal for short), a base station, a wireless network controller, a core network, etc.; wherein, the base station refers to equipment providing services to the terminal and communicating with the terminal through an uplink chain and a downlink chain; downlink (or called forward direction) refers to a direction from the base station to the terminal and uplink (or called reverse direction) refers to a direction from the terminal to the base station.
无线通信系统主要包括移动终端(简称终端)、基站、无线网络控制器、核心网等网络实体,其中,基站是指给终端提供服务的设备,基站通过上下行链路与终端进行通信,下行(或称前向)是指基站到终端的方向,上行(或称反向)是指终端到基站的方向。
According to self-study ability of neural network, this paper designed a fuzzy neural network controller to apply in one of the post-stall maneuvers milestone7degree angle of attack trimmed flight through train the fuzzy logic rules and membership functions of the traditional fuzzy logic controller, then we got satisfied results.
利用神经网络具有自学习能力的优势,采用反向传播学习算法,通过对传统模糊逻辑控制器中的模糊逻辑控制规则和隶属函数有关参数进行训练学习,设计了模糊神经网络控制器,应用于飞机的过失速机动"里程碑"之一 - 70º迎角定常飞行仿真计算,获得了令人满意的结果。
Neural Optimizer Search makes use of a recurrent neural network controller which is given access to a list of simple primitives that are typically relevant for optimization.
神经优化器搜索使用递归神经网络 控制器,实现对与优化相关的简单原语列表的访问。
Each Z-Wave device is embedded with a code, and when the device is plugged into the system, the network controller recognizes the code, determines its location and adds it to the network.
每个Z-Wave装置都内置代码,当启动装置开始对系统进行操作的时候,网络控制器会识别这个代码,确定它的位置然后把它送到网络上去。
The network controller 11 interprets the digital signal output from the transceiver 12 based on the MOST protocol, retrieves data or message, and passes it to the microcomputer 200.
并且,网络控制器11根据MOST协议解释从收发器12输入的数字信号而取出数据或消息,向微机200传递。
Use a crossover cable to connect the network controller on the server to SPA.
使用交叉电缆将服务器上的网络控制器连接到SPA。
The WINC network controller features embedded flash memory which allows the device to host network services stack and Wi-Fi stack for rapid design development.
WINC 网络控制器 以嵌入式闪存为特点,设备通过该功能可以托管网络服务堆栈和 Wi-Fi 堆栈,实现迅速的设计开发。
For a network to exploit these features, a network controller is a DCM enabled network node; however other nodes do not need to be DCM enabled. For example, in a DCM enabled MoCA network, MoCA 1.1 and MoCA2.0 with no DCM support, can coexist in the DCM enabled MoCA network without performance degradation. To clarify, a capable DCM node includes a node capable of operating in a DCM mode as either a node capable of bonded channels communication or a node capable of single channel communication.
为了使网络具有这些特征,网络控制器为启用了DCM的网络节点;但其他节点不需要启用DCM。例如,在启用了DCM的MoCA网络中,不支持DCM的MoCA 1.1和MoCA2.0可在启用了DCM的MoCA网络中共存,不会减弱性能。说的更清楚一点,具有DCM功能的节点包括能在DCM模式下运行的节点,作为能进行绑定通道通信的节点或能进行单通道通信的节点。
SCCN data are outputted and connected to TR-2000 network controller
SCCN数据输出连接到TR-2000网络控制器
Atmel is also introducing the WINC3400 network controller featuring embedded flash memory which allows the device to host network services stack, Wi-Fi stack, and Bluetooth Smart profiles for rapid design development with no wireless expertise required from the designer.
Atmel还推出了内嵌闪存的WINC3400网络控制器,支持设备存储网络服务堆栈、Wi-Fi堆栈和Bluetooth Smart配置文件,使设计者无需无线专业经验便可快速进行设计开发。
The Application Specific Standard Product line-up includes ICs for high-speed serial interfaces, such as USB 2.0 and USB OTG, as well as the network controller family of products, which uses TCP/IP protocol to monitor and communicate between different hubs.
特定应用的标准产品系列包括高速串行接口的 IC,如用于 USB 2.0 和 USB 的 OTG,以及网络控制器系列产品,采用 TCP/IP 协议在不同集线器之间进行监测和通信。
The WINC 3400 network controller offers an On-Chip Network Stack to minimize host CPU requirements.
WINC 3400网络控制器搭载了一个片上网络堆栈,能够最大程度降低主机CPU需求。