English

Arabic Catalan Chinese Czech Danish Dutch English French German Greek Hebrew Hindi Hungarian Italian Japanese Korean Persian Polish Portuguese Romanian Russian Slovak Spanish Swedish Thai Turkish Ukrainian Vietnamese

Chinese

Definition Arabic Catalan Chinese Czech Danish Dutch English French German Greek Hebrew Hindi Hungarian Italian Japanese Korean Persian Polish Portuguese Romanian Russian Slovak Spanish Swedish Thai Turkish Ukrainian Vietnamese

Favorites

Advertising

reference mark

Definition

1. notation made to direct attention to something specific 2. symbol guiding readers... See more

Translation of "reference mark" in Chinese

Definition Synonyms

NEW

参考标记

原点标记

基准标记

引用标记

Each cored cylinder shall be marked with an appropriate reference mark and the date and time of spraying.

每个样芯柱应当被标上适当的参考标记，如喷射时间。

set count, evaluate reference mark latch, change of direction, frequency control

设置计数，评价参考标记锁存电路，方向变换，频率控制

Thermally stable, bi-directional reference mark

热稳定性双向原点标记

Customer selectable IN-TRAC optical reference mark available on a variety of scale types

多种类型光学尺都配有用户可自行选择与定义的IN-TRAC 光学原点标记

The rotor will rotate for several turns to search for the reference mark on the encoder disk in the measuring drive unit.

转子将转动几转，搜寻测量驱动装置中码盘上的基准标记。

The reference mark is disregarded.

忽略基准标记。

In the latter case, a duplicate should be issued on that entity's official letterhead, stamped and duly contain a reference mark, indicating that the original document was being kept by the entity in question itself.

在后一情况中，复本应当有该实体的正式信笺抬头、印记并适当载有表明文件正本由有关实体本身保存的参考标记。

This reference mark will be activated as zero position until the instrument is switched off or MSC deactivated.

此基准标记将激活为零位，直至仪器被关闭或微观应力控制去激活。

A first reference mark 21 (see FIG. 2) is now written at a predefined position relative to the servo track.

这时第一参考标记21（见图2）在相对于伺服道的预定位置被写入。

Uniquely, the IN-TRAC reference mark is directly embedded into the incremental channel, which maximises immunity to yaw-induced de-phasing and furthermore, ensures phasing is retained throughout the entire speed and temperature range.

独特的 IN-TRAC 参考标记直接刻入划增量槽刻度中，这在如此已最大程度相当有效地上防止避免了因偏角引起的移相位偏差，此外，确保整个所有速度和温度范围内相位保持一致。

The IN-TRAC optical reference mark provides a bi-directionally repeatable datum point across the entire speed and temperature range (over 12 m/s and up to 85 ºC) without increasing overall system width.

IN-TRAC 光学参考标记在整个速度和温度范围（12 m/s 以上，最高85 ºC）内均具有双向可重复的基准点，不增加系统总体宽度。

Renishaw's SiGNUM range offers high speed, reliable, non-contact performance combined with advanced features including the IN-TRAC auto-phase optical reference mark and dynamic signal processing.

Renishaw 的 SiGNUM 系列产品具有高速、可靠、非接触的性能，并有 IN-TRAC 自动相位光学参考标记和动态信号处理等先进功能。

With the auto-phase IN-TRAC optical reference mark, auto-calibration and integral diagnostic LEDs, installation could not be easier - TONiC can be set-up and running with maximum performance and minimum fuss in a matter of seconds.

具备自动相位 IN-TRAC 光学原点标记、自动更正及内建诊断 LED指示灯，安装再简单不过 - TONiC 可在几秒内完成安装并于最佳的性能与简便的操作下开始运作。