Advertising
Register for free: access more results and features
section modulus
Definition
Translation of "section modulus" in Chinese
Definition NEW
截面模数
截面模量
In this load situation, the section modulus of the blade profile is at its highest, which reduces the risk of damage.
在这样的负载情况下，叶片轮廓的断面系数达到最高值，这就降低了损害风险。
And tube, shaped tube generally have a greater moment of inertia and section modulus, bending and torsional ability, can greatly reduce the structural weight, saving steel. 18.
和圆管相比，异型管一般都有较大的惯性矩和截面模数，有较大的抗弯抗扭能力，可以大大减轻结构重量，节约钢材。
The elastomer core 38 provides sufficient longitudinal shear transfer between the inner and outer metal plates 34 and 36 of the composite panel 18, to enable all of the plates 34 and 36 to contribute to the elastic section modulus and hence the moment resistance of the tanker as a whole.
弹性体芯38在复合板18的内外金属板34和36之间提供足够的纵向剪切力转移，使所有的板34和36都能够有助于产生弹性断面模量并由此产生整体的油船的力矩抵抗性能。
The axle 2 extending from one side of the vehicle to the other is approximately square in cross-section in its central region, differing from the coupling portion 4 and is provided with pressed-in groove deformations 6, thereby forming a torsional portion 6a in which the respective torsional section modulus is less than in the coupling portions 4 of the axle 2.
轴2从机动车一侧到达另一侧，该轴在其中间区域上与联轴节4不同地具有大致呈正方形的横截面并且还设有压入的导槽变形部6，从而形成一个扭转区段6a，在该扭转区段上的各处扭转阻力矩小于于轴2的联轴节4上的扭转阻力矩。
As shown in FIG. 8, in the case where the impact load P1 caused by collision acts on either of the two ends 52 of the front underrun protector 5 in the lateral direction of the vehicle, the stacked first and second plate parts 31 and 32 can gradually amplify a substantial thickness (section modulus) according to the increased bending moment described above.
如图8所示，在碰撞引起的冲击载荷P1作用在沿着车辆横向方向前部防钻撞装置5的两端52中的任一个上的情况中，堆叠的第一和第二板状部件31和32可以根据上述增大的弯曲力矩而逐渐放大基本厚度（截面模量）。
If bending moments (due to the wind, for example) should be available in addition to the axial force, they can be considered in RF-TIMBER Pro with the same procedure, as the correct section modulus Sz is already considered for the bending stress.
除了轴力外还应该有弯矩（例如由于风荷载 ） ， 也可以在模块 RF-TIMBER Pro 以相同的步骤考虑，因为截面模量 Sz 已经在弯曲应力中考虑了。
Serial number Size Cross-sectional area Section center of gravity Moment of inertia Radius of gyration Section modulus
序号 尺 寸 截面积 型钢重心 惯性矩 回转半径 截面模数
Here, the stress acting on the bending portion A1 of the piston member 41 when engaging the second clutch C2 is equal to the bending moment M1 divided by the section modulus of the piston member 41, and therefore increasing the section modulus of the piston member 41 is effective in reducing the stress that acts on the bending portion A1.
A time-variant reliability formulation is presented in this paper to account for the effects of fatigue, corrosion and maintenance actions on the first yield reliability of midship section modulus.
由此可见，对存在疲劳和腐蚀损伤的船体梁进行时变可靠性分析时，必须考虑维修因素的影响才能更加符合实际情况。
This further guide profile 52 is preferably made of light metal, in particular AL-alloy and has, compared to the first guide profile 34 that due to its cross-section has a high section modulus around an axis extending perpendicularly to a center plane 48, a low section modulus, with the result that it can be adjusted to the bow-shaped curvature of the lateral wall even if it is made of metal.
所述另一导向型材52优选由轻金属、尤其是由铝合金制成并且与第一导向型材34相反具有相对小的阻力矩，因此第二导向型材即使在金属的实施方式中也可适应侧壁的拱形弯曲，而第一导向型材34由横截面决定地围绕垂直于中心平面48延伸的轴线具有大的阻力矩。
Synonyms and analogies of "section modulus" in English
Word & Expression of the day
Image of the day
Results: 10. Exact: 10. Elapsed time: 36 ms.
