English

Arabic Catalan Chinese Czech Danish Dutch English French German Greek Hebrew Hindi Hungarian Italian Japanese Korean Persian Polish Portuguese Romanian Russian Slovak Spanish Swedish Thai Turkish Ukrainian Vietnamese

Chinese

Definition Arabic Catalan Chinese Czech Danish Dutch English French German Greek Hebrew Hindi Hungarian Italian Japanese Korean Persian Polish Portuguese Romanian Russian Slovak Spanish Swedish Thai Turkish Ukrainian Vietnamese

Suggestions: width-wise

Favorites

Advertising

widthwise

Definition

in a direction or manner across the width ... See more

Translation of "widthwise" in Chinese

Definition NEW

宽度

横向

By virtue of the structure discussed above, when the fixed width servo 46 rotates, the bracket 34 and the rotating body swivel section 23 move in the widthwise direction of the substrate over the LM guide 29, through screw action on the part of the threaded shaft 45 and the bracket 34.

根据上述的结构，如果定宽伺服马达46旋转，则通过螺旋轴45与托架34的螺旋作用，托架34和旋转体转动部23使LM导向件29朝向基材宽度方向移动。

As a result, as seen from the chain widthwise direction W, a moment R2 is produced on the second pin 4 in the second flexing area 32 about the projecting center M by the second pressure Q2.

结果，当从链条宽度方向W看时，通过第二压力Q2绕凸出中心M在第二挠曲区域32中的第二销钉4上产生力矩R2。

Take a piece of paper and fold it in half, first widthwise and then lengthwise.

拿起一张纸片，先纵向对折，然后再横向对折。

Further, in a state after the engagement, a cross section of the bundle wire 106 held by the heater electrical connecting piece 108 has a widthwise direction which is a flattened direction of the heater electrical connecting piece 108 and has a longitudinal direction which is the direction in which the bundle wire 106 is flattened and enlarged.

另外，在接合之后的状态中，由加热器电连接件108所保持的线束106的横截面具有横向方向和纵向方向，所述横向方向是加热器电连接件108的变平坦方向，所述纵向方向是线束106变平坦和扩大的方向。

When the second key member 4b is thus pushed in, the protrusions 12 of the member 4b are opposed to the protrusions 7 of the first key member 4a, moving the parallel engaging portions 6, 6 of the member 4a away from each other widthwise thereof.

当第二键元件4b如此推进时，元件4b的凸起12与第一键元件4a的凸起反向，移动元件4a的平行联接区6、6在其横向互相分离。

Thus, the connector 10 is held in contact with the restricting pieces 32 contact the opposite widthwise sides of the connector 10 to prevent inclination of the connector 10 to the right against a rotational moment.

由于连接器10在任一接触状态下都优选在其大致相反的两个横向侧与两个限制片32接触，所以防止了连接器10克服该连接器10的旋转力矩而向右倾斜。

With the above configuration, the each of the first fastening bolt 82 and the second fastening bolt 84 extends in the direction orthogonal to the extending direction of the bolt 72 (widthwise direction of the vehicle 10), so that even if moment in the direction of pulling out the bolts 72 acts on the housing 46 upon collision of the vehicle 10, the first fastening bolt 82 and the second fastening bolt 84 cannot be easily separated.

根据这样的结构，第一紧固螺栓82及第二紧固螺栓84分别沿着与螺栓72的延伸方向（车宽方向）正交的方向延伸，因此在车辆碰撞时，即使对壳体46作用拉拽所述螺栓72的方向的力矩，第一紧固螺栓82及第二紧固螺栓84也不易脱落。由此，能够可靠地抑制壳体46从托架构件69脱离的情况。