If this stage fails to set up the loopback device as the root device then you may see a message that there is no root device and the kernel aborts.
Als het in dit stadium niet lukt het loopback-device als het root-device in te stellen, dan zie je wellicht een melding dat er geen root-device is en breekt de kernel af.
It is a very simple one that allows the loopback device to be used as the root filesystem.
The/linuxrc file on the initial ramdisk is required to do all of the preparations so that the loopback device can be used for the root partition when it exits.
Het bestand/linuxrc op de initiële ramdisk is nodig voor alle voorbereidingen zodat het loopback-device voor de root-partitie kan worden gebruikt als 't beëindigt.
The initial ramdisk device in Linux is another important mechanism that we need to be able to use a loopback device as a the root filesystem.
Het initiële ramdisk device is onder Linux een ander belangrijk mechanisme dat we nodig hebben om een loopback-device als een root-bestandssysteem te kunnen gebruiken.
Cannot use a loopback device, running as non-root user.
The normal boot sequence of the new root device will now continue and this is quite verbose.
De normale bootreeks van het nieuwe root-device zal nu verdergaan en hierbij worden heel wat meldingen weergegeven.
Two examples include failing hard drives and specifying an invalid root device or kernel in the boot loader configuration file.
Twee voorbeelden zijn defecte harde schijven en het opgeven van een ongeldig root apparaat of ongeldige kernel in de bootloader configuratie.
Other problems that can occur are that the boot sequence is confused about where the root device is, this is probably due to a problem with/etc/fstab.
Andere problemen die op kunnen treden bestaan daaruit dat de bootreeks van slag is over waar het root-device is, dit is waarschijnlijk te wijten aan een probleem met/etc/fstab.
This may cause the system to drop to a busybox initramfs shell on boot with a "Gave up waiting for root device."
Dit kan ervoor zorgen dat het systeem een busybox initramfs shell toont bij het opstarten met de melding Gave up waiting for root device.
To boot from this new root device all that is required is that the floppy disk prepared as described above is inserted for the PC to boot from.
Alles wat je nodig hebt om vanaf dit nieuwe root-device te booten, is dat de diskette geprepareerd zoals hiervoor is beschreven in het diskettestation is gedaan om vanaf te booten.
However, when boot -a has been requesting to ask for entering the name of the root device manually, it must be noted that this routine still cannot actually parse a name entered there that refers to a Vinum volume.
Maar als boot -a is gegeven om de naam van het root apparaat te vragen, kan het nog steeds niet overweg met een naam die refereert aan een Vinum volume.
This would pass the device parameter string through, and also ask the kernel to set the root device to/dev/sda1 and save the whole command line and reuse it for all future boots.
Hiermee zou de parameterstring voor het device worden doorgegeven en zou de kernel ook worden gevraagd het rootdevice op/dev/sda1 in te stellen en de gehele opdrachtregel te bewaren en het voor alle toekomstige boots opnieuw te gebruiken.
Potentially sensitive or inappropriate content
Examples are used only to help you translate the word or expression searched in various contexts. They are not selected or validated by us and can contain inappropriate terms or ideas. Please report examples to be edited or not to be displayed. Potentially sensitive, inappropriate or colloquial translations are usually marked in red or in orange.