Example: hplj1 (node name of the all-in-one)
You can also type the node name relative to ZoneName or , which specifies the zone's root node.
U kunt de knooppuntnaam ook relatief aan de zonenaam invoeren of typen, wat het basisknooppunt van de zone is.
If the machine you want to use does not appear in the device list, check the following points before searching for your machine again: Confirm your machine's IP address or node name.
Als de gewenste machine niet wordt weergegeven in de apparaatlijst, controleert u de volgende punten voor u opnieuw zoekt naar de machine: Controleer of het IP-adres of de knooppuntnaam van de machine correct is.
Enter device address Enter the IP address or node name (up to 127 characters) of the machine you want to use, and then click Search.
Apparaatadres invoeren Voer het IP-adres of de knooppuntnaam (maximaal 127 tekens) in van de machine die u wilt gebruiken, en klik vervolgens op Zoeken.
3 Note The node name and the NetBIOS name is printed on the Printer Settings Page.
Opmerking De knooppuntnaam en de NetBIOS-naam staan op de pagina met printerinstellingen.
On the Assignments page, each group or system where the policy is assigned appears with its Node Name and Node Type.
Op de pagina Toewijzingen wordt elke groep of elk systeem waaraan het beleid is toegewezen, weergegeven met de knooppuntnaam en het knooppunttype.
You can also find the Node Name and MAC Address from the control panel.
U kunt de knooppuntnaam en het MAC-adres ook via het bedieningspaneel vinden.
You can find the Node Name and MAC Address (Ethernet Address) by printing the Network Configuration List.
U kunt de knooppuntnaam en het MAC-adres (Ethernet-adres) vinden door het netwerkconfiguratierapport af te drukken.
Node name: The Node name appears in the current BRAdmin Light window.
Knooppuntnaam: de knooppuntnaam is te vinden in het huidige venster van BRAdmin Light.
An invalid node name parameter was specified.
Name: port or node name, the number can change with each bus reset
Naam: poort of nodenaam, het nummer kan wijzigen met elke busreset
Read a node name and select it
menu entry node name should not contain':'