On contact with the sample solution they assume a particular colour.
c robenidine concentration of the sample solution in μg/ml,
Inject 1 μl of silylated sample solution and measure peak areas.
Injecteer 1 μl gesilyleerde monsteroplossing en meet de piekoppervlakken.
A defined volume of the sample solution is loaded onto the column either using an auto-sampler or manually in a sharply defined zone.
Een bekend volume van de monsteroplossing wordt met behulp van een autosampler of manueel in een scherp begrensde zone op de kolom gebracht.
volume of sample solution (5.4) in ml
volume van de monsteroplossing (5.4) in ml
Transfer approximately 1 ml of the sample solution into an ampoule (5.14).
Breng ongeveer 1 ml monsteroplossing in een ampul (5.14).
When necessary, the sample solution is purified via a membrane filter with a pore size of between 0,2 and 2 μm.
Indien nodig wordt de monsteroplossing gezuiverd over een membraanfilter met een poriegrootte tussen 0,2 en 2 μm.
Approximately 1 ml of the sample solution is filled into an ampule according to section 5.16.
Ongeveer 1 ml van de monsteroplossing wordt in een ampul volgens paragraaf 5.16 afgevuld.
c lasalocid sodium concentration of the sample solution (5.2.2) in μg/ml
c het gehalte lasalocide-natrium van de monsteroplossing (5.2.2) in μg/ml
peak height (area) of diclazuril in the sample solution (5.2.2)
piekhoogte (-oppervlakte) van diclazuril in de monsteroplossing (5.2.2)
After 15 minutes measure the optical density of the sample solution with the spectrophotometer at 420 nm.
Meet na 15 minuten met de spectrofotometer de extinctie van de monsteroplossing bij 420 nm.
For preparing this sample solution corresponding amounts of the sample material obtained according to the sections 6.3.1 and 6.3.2 are weighed and dissolved in corresponding amounts of n-heptane.
Ter bereiding van deze monsteroplossing worden overeenkomstige hoeveelheden van het volgens de paragrafen 6.3.1 en 6.3.2 verkregen monstermateriaal gewogen en in overeenkomstige hoeveelheden n-heptaan opgelost.
Preparation of sample solution: weigh accurately about 3 g of dry sample into a 100 ml volumetric flask and add about 80 ml of purified, deionised water.
Bereiding van de monsteroplossing: weeg ongeveer 3 g droog monster nauwkeurig af in een maatkolf van 100 ml en voeg ongeveer 80 ml gezuiverd, gedeïoniseerd water toe.