Restart the system and press F2 to access the BIOS setup program.
Führen Sie einen Systemneustart durch und drücken Sie auf F2, um das BIOS-Setup-Programm zu starten.
Setup A password is only required for entering the BIOS Setup program.
[Setup]: Das Kennwort wird nur beim Aufrufen des BIOS-Setup abgefragt.
When the BIOS Setup Program appears, press [Ctrl]+[Alt]+[D]; the computer should beep in response.
Erscheint das BIOS-Setup, drücken Sie die Tastenkombination [Ctrl]+[Alt]+[D]. Der Computer reagiert mit einem akustischen Signal.
The BIOS setup program can be used to view and change the BIOS settings for the computer.
Das BIOS-Setup-Programm kann verwendet werden, um die BIOS-Einstellungen für den Computer anzuzeigen und zu ändern.
Enter the BIOS setup program, and restore the BIOS settings.
Starten Sie das BIOS-Setup-Programm und stellen Sie die BIOS-Einstellungen wieder her.
Start the PC and press the [DEL] or [F2]key to enter the BIOS setup program.
Starten Sie den PC und drücken Sie die [ENTF] oder [F2]Taste um das BIOS-Setup-Programm aufzurufen.
Press F2 during POST to enter the BIOS setup program.
Drücken Sie während des POST-Vorgangs die Taste F2, um in das BIOS-Setup-Programm zu gelangen.
ASUS TW510-E2 5-11 5.2 BIOS setup program This motherboard supports a programmable Low-Pin Count (LPC) chip that you can update using the provided utility described in section "5.1 Managing and updating your BIOS."
Kapitel 4: BIOS-Setup 4.2 BIOS-Setupprogramm Dieses Motherboard enthält einen programmierbaren Firmware-Chip, den Sie mit dem im Abschnitt "4.1 Verwalten und Aktualisieren des BIOS" beschriebenen Dienstprogramm aktualisieren können.
If your computer has a BIOS that supports the BIOS Boot Specification (BBS) or enables Plug and Play (PnP) compliant selection of the boot order in the BIOS setup program, this setting will always be Use BIOS Setup Boot Order and cannot be changed.
Wenn Ihr Computer ein BIOS hat, das BIOS Boot Specification (BBS) oder Plug&Play-kompatible (PnP) Auswahl der Startreihenfolge im BIOS-Setupprogramm unterstützt, ist diese Einstellung immer "BIOS Setup-Startreihenfolge verwenden" und kann nicht geändert werden.
58ASUS H87-PRO 3-3 Chapter 3 3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program.
70ASUS F1A75-V PRO 3-1 1 Kapitel 3 EZ Mode Standardmäßig wird beim Aufrufen des BIOS-Setupprogramms das EZ-Mode -Fenster geladen.
Potentially sensitive or inappropriate content
Examples are used only to help you translate the word or expression searched in various contexts. They are not selected or validated by us and can contain inappropriate terms or ideas. Please report examples to be edited or not to be displayed. Potentially sensitive, inappropriate or colloquial translations are usually marked in red or in orange.