The bar optimisation program of another provider - for example your window and facade construction program - makes a suggestion for arranging the single parts on the profile rod.
The machine operator thus sees that in this program he must push the rod remainder to the stop when bar optimisation no longer has enough fixtures available.
Der Maschinenbediener sieht also, dass er in diesem Programm die Reststange an den Anschlag schieben muss, wenn bei der Stangenoptimierung nicht mehr genug Spanner zur Verfügung stehen.
In the bar optimiser variant of bar optimisation, the machine operator must place the profile rod into an area of the machine bed that - depending on the partial program to be produced - can be reached by as many fixtures as possible.
Bei der „Bar Optimizer"-Variante der Stangenoptimierung muss der Maschinenbediener die Profilstange in einen Bereich des Maschinenbetts legen, den - bezogen auf das zu fertigende Teileprogramm - möglichst viele Spanner anfahren können.
In principle there are two options for how the calculated bar optimisation can be implemented: With the "Bar Splitter" program, or with the "Bar Optimizer" program.
Grundsätzlich gibt es zwei Möglichkeiten, wie die errechnete Stangenoptimierung umgesetzt werden kann: mit dem Programm „Bar Splitter" oder mit dem Programm „Bar Optimizer".
Dividing rods that have been pre-optimised in external programs by allowing eluCad to take fixtures into consideration can sometimes lead to a worse result than simply allowing the eluCad module "Bar optimisation" to calculate "Cut optimisation with fixture consideration" directly.
Das Aufteilen von Stangen, die in Fremdprogrammen voroptimiert wurden, mit Spannerberücksichtigung durch eluCad kann zu einem schlechteren Ergebnis führen als die „Verschnittoptimierung mit Spannerberücksichtigung", die direkt vom eluCad-Modul „Stangenoptimierung" errechnet wird.
However: Bar optimisation doesn't always have the goal of reducing material consumption - sometimes optimisation is also desirable in terms of "Clampability of single parts", "Possible paths for fixtures" or "Speed of the processing program".
Allerdings: Nicht immer hat Stangenoptimierung reduzierten Materialverbrauch zum Ziel - manchmal soll auch hinsichtlich „Spannbarkeit der Einzelteile", „mögliche Verfahrwege der Spanner" oder „Schnelligkeit des Bearbeitungsprogramms" optimiert werden.
This is why Lely developed the DairyWise farm management optimisation program.
Aus diesem Grund hat Lely das DairyWise Farm Management Optimierungsprogramm entwickelt.
At the same time, we create the basis for further optimisation programs.
The modular based cutting optimisation program with barcode labelling guarantees maximum process reliability.
Das modular aufgebaute Schnittoptimierungsprogramm mit BarcodeEtikettierung steht für höchste Prozesssicherheit.
This has consequences for bar optimisation.
Daraus ergeben sich Konsequenzen für die Stangenoptimierung.
A defined interface permits data exchange with your optimisation program,
Eine definierte Schnittstelle ermöglicht den Datenaustausch mit Ihrem Optimierungsprogramm,
Potentially sensitive or inappropriate content
Examples are used only to help you translate the word or expression searched in various contexts. They are not selected or validated by us and can contain inappropriate terms or ideas. Please report examples to be edited or not to be displayed. Potentially sensitive, inappropriate or colloquial translations are usually marked in red or in orange.