It is also important to verify cabling lengths before installing any enclosure.
엔클로저를 설치하기 전에 케이블 연결 길이를 확인하는 것도 중요합니다.
The following figure illustrates the cabling scheme for this configuration.
다음 그림은 이 구성을 위한 케이블 연결 구조를 보여줍니다.
You can add features and select cabling entities only in the active harness.
활성 하네스에서만 피쳐를 추가하고 케이블링 엔티티를 선택할 수 있습니다.
Select neither to exclude any cabling geometry information from the export.
둘 다 선택하지 않으면 케이블링 형상 정보가 내보내기에서 제외됩니다.
Use patch cords to certify a fiber cabling system.
패치 코드를 사용하여 광케이블 배선 시스템을 인증.
Users also have the chance that cabling data can be defined as specifications for downstream engineering processes.
또한 사용자가 다운스트림 엔지니어링 프로세스를 위해 배선 데이터를 사양으로 정의할 수 있다는 장점도 있다.
Strip table files are run every time you regenerate a cabling assembly.
스트립 테이블 파일은 케이블링 어셈블리를 재생성할 때마다 실행됩니다.
During the initial test, all cabling and connections are evaluated.
초기 테스트 동안 모든 케이블링 및 연결이 평가됩니다.
Modify network configurations without having to change actual cabling and switch setups.
실제 케이블 연결 및 스위치 설정을 변경하지 않고도 네트워크 구성을 수정할 수 있습니다.
The following is a list of cabling parameters arranged by object.
다음은 개체 순으로 정렬된 케이블링 매개변수 목록입니다.
Controls display of reference designators in a drawing of a cabling assembly.
케이블링 어셈블리 드로잉에서 참조 지정자의 디스플레이를 제어합니다.
A terminator is a cabling object with a set of parameters.
종료자는 매개변수 세트가 있는 케이블링 개체입니다.
The selected terminators are removed from the diagram or cabling assembly.
선택한 종료자가 다이어그램이나 케이블링 어셈블리에서 제거됩니다.