The filter element of the mask adopts two layers of ultra-fine melt-blown non-woven fabric that has been electrostatically treated, and the bacterial filtration efficiency reaches more than 95%
마스크의 필터 요소는 정전기 처리 된 극세 멜트 블로운 부직포의 2 층을 채택하고 박테리아 여과 효율은 95 % 이상에 이릅니다.
Carbonnanotubes (CNT) are used in adhesives, coatings and polymers and as electrically conductive fillers in plastics to dissipate static charges in electrical equipment and in electrostatically paintable automobile body panels.
Carbonnanotubes (CNT)는 접착제, 코팅 및 폴리머 및 플라스틱의 전기 전도성 충진재로 사용되어 전기 장비 및 정전기 페인트 자동차 자동차 패널의 정전기를 분산시킵니다.
The surface treatment is brushed or electrostatically sprayed, and the appearance is beautiful.
The appearance of the machine is electrostatically sprayed, and other parts are plated, with high anti-rust ability and beautiful appearance.
기계의 외관은 정전기로 살포되고, 다른 부속은 높은 녹슬지 않는 능력 및 아름다운 외관과 더불어, 도금됩니다.
Strainers are electrostatically coated with polyester at a thickness of 150-200 micron and oven cured.
Second, even in the case of suppressing the occurrence of charge, prompting charge leakage still electrostatically charged, we should actively eliminate any static electricity.
둘째, 충전, 여전히 정전 충전, 충전 누설 메시지의 발생을 억제의 경우에 우리가 적극적으로 모든 정전기 제거 한다.
The sensor must be electrostatically shielded, and the electrode lead-out wire is double-shielded.
센서는 정전기로 차폐되어야 하며 전극 인출선은 이중 차폐되어야 합니다.
During the cutting and sewing operations required to manufacture the FIBC's, the fabric gets electrostatically charged.
The shell is formed by ZL102 cast aluminum die-casting, and the surface is electrostatically sprayed with powder.
쉘은 ZL102 캐스트 알루미늄 다이캐스팅으로 형성되며 표면에는 분말이 정전기로 분무됩니다.
ESD operating parts from KIPP were specially developed for use in ESD protection areas which often incorporate electrostatically sensitive components.
KIPP사의 ESD 작동 부품들은 정전기에 민감한 부품들이 있는 ESD 보호구역 사용을 위해 특수 개발되었습니다.
However, I was able to electrostatically lift a boot print from it.
모두를 기절시킨 학교는 장갑을 끼고 있었다 그래서 지문을 들 수 없었어 하지만 정전기적으로 할 수 있었다 부츠 프린트를 뽑다 추적할 수 있어?
The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin".
Elimination: filter the ink and remove the squeegee to reduce the concentration; the white ink can be pre-sharpened to electrostatically treat the film, use sharpened chopsticks to scrape between the squeegee and the plate, or add an electrostatic agent.
제거: 잉크를 걸러내고 스퀴지를 제거하여 농도를 줄입니다.흰색 잉크는 미리 날카롭게 하여 필름을 정전기로 처리하거나 날카로운 젓가락을 사용하여 스퀴지와 플레이트 사이를 긁거나 정전기 방지제를 추가할 수 있습니다.