Therefore, considering comprehensively, rock wool is generally selected as the wall interlayer material.
따라서 포괄적으로 고려할 때 암면은 일반적으로 벽 중간층 재료로 선택됩니다.
If it contains wool, even if only for structural purposes of the lining, interlayer, filler, but also in order to mark the fiber content, such as "100% wool front, 90% polyester, 10% wool lining".
양모가 포함된 경우에는 안감, 중간층, 충전재의 구조적 용도일지라도 "앞면 100% 울, 폴리에스터 90%, 울 안감 10%"와 같이 섬유 함량을 표시하기 위한 용도로도 사용됩니다.
Thanks to this interlayer carpet gets elasticity, slip resistance and shrinkage, additional sound and heat insulation.
이 층간 카펫 덕분에 탄성, 미끄럼 저항과 수축, 추가 소리와 열 절연을 가져옵니다.
The through holes in the board are used to connect the front and back lines of the double panel or to connect any interlayer lines in the multilayer board.
보드의 관통 구멍은 이중 패널의 전면 및 후면 라인을 연결하거나 다층 보드의 층간 라인을 연결하는 데 사용됩니다.
Trosifol offers interlayer products that are widely used in structural glazing applications all around the world.
Trosifol은 전 세계 구조용 접합유리 글레이징 분야에서 널리 사용되는 중간막 제품을 제공합니다.
Packing paper interlayer, then wraped by kraft paper, then in polywood case.
포장 종이 중간막, 그 다음 크라프트지로 포장한 다음 폴리우드 케이스에 넣습니다.
The cooling or heating solution in the interlayer can be competely removed after reaction.
중간층의 냉각 또는 가열 용액은 반응 후 경쟁적으로 제거 될 수있다.
The ceramic fiber interlayer is composed of the following ceramic fiber products.
세라믹 섬유 중간층은 다음과 같은 세라믹 섬유 제품으로 구성됩니다.
However, it must be removed before welding because it melts at a higher temperature than titanium and can enter the molten weld pool to create inclusions that weaken the interlayer.
그러나 티타늄보다 높은 온도에서 녹고 용융 된 용접 풀에 들어가서 중간층을 약화시키는 개재물을 생성 할 수 있기 때문에 용접 전에 제거해야합니다.
The electrostatic adsorption interlayer can adsorb particulate matter, and more layers of efficient filtering layer by layer protect breathing health.
정전기 흡착 중간층은 입자상 물질을 흡착할 수 있으며, 층별로 더 많은 층의 효율적인 여과층이 호흡 건강을 보호합니다.
The interlayer of the furnace shell can be used to further cool the circulating convection gas to accelerate the cooling rate of the furnace body.
퍼니스 쉘의 중간층은 순환 대류 가스를 추가로 냉각시켜 퍼니스 본체의 냉각 속도를 가속화하는데 사용될 수있다.
For example, the interlayer's stiffness and strength help to create lighter and safer structural glass that can withstand greater loads and harsh conditions.
예를 들어, 이 중간막은 강성과 강도가 뛰어나 더 큰 무게와 척박한 조건을 견딜 수 있는 구조물용 유리를 더 가볍고 안전하게 만들 수 있습니다.
The interlayer temperature shall not be higher than 200℃ to prevent excessive growth of grains at high temperature.
층간 온도는 고온에서 입자의 과도한 성장을 방지하기 위해 200 ℃보다 높지 않아야한다.