Interleaf, however, uses a different system for presenting dashed lines.
그러나 Interleaf는 대시 선을 나타낼 때 다른 시스템을 사용합니다.
It is not possible to import transformed text elements in Interleaf.
Interleaf에서 변환된 텍스트 요소를 가져올 수 없습니다.
Located below this is a pop-up menu from which you can select the required Interleaf style.
이 아래에 필요한 Interleaf 스타일을 선택할 수 있는 팝업 메뉴가 있습니다.
The small element segments can only be edited with difficulty in Interleaf.
Interleaf에서 작은 요소 세그먼트만 편집하기가 어려울 수 있습니다.
This enables users to post-edit graphics, provided that they are imported in the correct Interleaf format.
이렇게 하면 그래픽을 올바른 Interleaf 형식으로 가져왔다는 가정 하에 사용자가 그래픽을 사후 편집할 수 있습니다...
If you select this setting, all dashed elements will be converted into individual small element segments, i.e. a single line in [PROD161] produces a number of small line segments in Interleaf.
이 설정을 선택하면 모든 대시 요소가 작은 개별 요소 세그먼트로 변환됩니다. 즉, [PROD161]의 단일 선은 Interleaf에서 여러 개의 작은 선 세그먼트가 됩니다.
When exporting [PROD161] files, every effort is made to depict as many attributes as possible in Interleaf format.
[PROD161] 파일을 내보낼 때 가능한 많은 속성을 Interleaf 형식으로 표시하기 위해 많은 노력이 듭니다.
You can use this dialog box to assign every [PROD161] style to an Interleaf style.
이 대화상자를 사용하여 모든 [PROD161] 스타일을 Interleaf 스타일로 지정할 수 있습니다.
Since Interleaf cannot perform a corresponding conversion, this method had the advantage that the Interleaf user requires no further software or hardware in order to use an illustration.
Interleaf에서는 해당 변환을 수행할 수 없으므로 이 방법은 Interleaf 사용자가 추가 소프트웨어나 하드웨어 없이도 그림을 사용할 수 있다는 장점이 있습니다.
It is supplied refrigerated or with a PE interleaf.
This file can then be transferred to the workstation using either a floppy disk or a network. and then only has to be opened in Interleaf.
플로피 디스크나 네트워크를 사용하여 이 파일을 워크스테이션으로 전송한 후 Interleaf에서 열기만 하면 됩니다.