The modulation phase difference in degrees between each subsequent voice.
연속되는 각 음성 간의 변조 위상차(도 단위)입니다.
Screen shows two lines at the same time of phase difference, frequency, waveform and the vector diagram.
화면에는 위상차, 주파수, 파형 및 벡터 다이어그램이 동시에 표시됩니다.
In the case of filters, transfer function helps to introduce a phase difference between input and output.
필터의 경우 전달 함수는 입력과 출력 사이에 위상차를 도입하는 데 도움이됩니다...
That is, the measurement of the phase difference in the actual power operation.
In order to effectively transfer the compensation energy, the phase difference between the noise source and the compensation current should be as small as possible, preferably in the same phase.
보상 에너지를 효과적으로 전달하기 위해, 노이즈 소스와 보상 전류 사이의 위상차는 가능한 한 바람직하게는 동일한 위상에서 작아야한다.
Coherent modulation requires dividing the source signal into two channels of the same frequency with a phase difference of 90º, and then separately modulating the two channels of photonic to form interference fringes.
코 히어 런트 변조는 소스 신호를 90 º의 위상차를 갖는 동일한 주파수의 2 개의 채널로 분할 한 다음 간섭 줄무늬를 형성하도록 광자의 2 개의 채널을 개별적으로 변조하는 것을 필요로한다.
The phase difference between the first and second sides of the transformer is a multiple of 30 degrees, so people use the same clock pointer relationship with the same degree of 30 degrees to visually explain the wiring group of the transformer.
변압기의 첫 번째와 두 번째 변 사이의 위상차는 30 도의 배수이기 때문에 변압기의 배선 그룹을 시각적으로 설명하기 위해 동일한 시계 포인터 관계를 동일한 정도의 30도에서 사용합니다.
Isometric pixel to apply the dual-cell technology in large pixel-based technology that can be taken to 1.4㎛ fast sharp image even in dark environments smartphone implements the phase difference auto focus DSLR camera level.
아이소셀 기술 기반 1.4㎛의 대형 화소에 듀얼픽셀 기술을 적용해 DSLR 카메라 수준의 위상차 자동초점 기능을 구현해 스마트폰으로 어두운 환경에서도 빠르고 선명한 이미지를 촬영 할 수 있다고 한다.
The output AC voltage is stabilized by changing the phase difference between the transformer and the primary voltage.
출력 AC 전압은 변압기와 1 차 전압 사이의 위상차를 변경하여 안정화됩니다.
Search inspection information (voltage, current, power factor, phase difference, THD, frequency and upper limit, etc.) of measuring meter
계기의 순시 정보(전압, 전류, 역률, 위상차, THD, 주파수, 상한 등)를 조회
This TDOA measurement is achieved by calculating the received phase difference at every section in the antenna array. It is thought of as reverse beamforming.
이 TDOA 측정은 안테나 어레이의 모든 섹션에서 수신된 위상차를 계산하여 달성됩니다... 역 빔포밍으로 생각됩니다...
Encoder input: 5v TTL 90 quadrature phase difference.
인코더 입력: 5v TTL 90 직교 위상차.
In Dynamic TMA (DTMA), a sinusoidal force and linear temperature ramp are applied to the sample (Figure A), and the resulting sinusoidal strain and sine wave phase difference (δ) are measured (Figure B).
동적 TMA(DTMA)에서는 사인파형 하중과 선형 온도 변화를 시료에 적용하고(그림 A) 결과적인 사인파형 변형률과 사인파 위상차(δ)를 측정합니다(그림 B).