Translation of "point code" in Korean
We couldn’t find this entry. Showing approximate results. Check your spelling or suggest adding this term to the dictionary.
Export all points from a selected corridor or constrain the selection based on station ranges or point code types.
선택한 코리더에서 모든 점을 내보내거나 측점 범위 또는 점 코드 유형에 따라 선택을 제한합니다.
They are labeled with their point code names.
여기에는 점 코드 이름이 레이블로 지정됩니다.
You can modify how points are connected when a point code is used multiple times at consecutive stations.
연속적인 측점에서 점 코드가 여러 번 사용된 경우에는 점의 연결 방법을 수정할 수 있습니다.
By default, ProdName joins all points with the same point code along a baseline and displays them as feature lines.
기본적으로, ProdName 에서는 기준선을 따라 점 코드가 같은 모든 점을 결합하며 이를 형상선으로 표시합니다.
The circular points on the green lines are of another type point code.
녹색 선의 동그란 점은 다른 유형의 점 코드에 해당됩니다.
Displays the feature line style assigned to each point code.
각 점 코드에 지정된 형상선 스타일을 표시합니다.
You can either export all points from a selected corridor or constrain the selection based on station ranges or point code types.
선택한 코리더에서 모든 점을 내보낼 수도 있고 측점 범위 또는 점 코드 유형에 따라 선택 사항을 제한할 수도 있습니다.
Displays the point code of the second feature line selected to define the slope pattern.
경사 패턴을 정의하면서 두 번째로 선택한 형상선의 점 코드를 표시합니다.
To delete feature lines between point codes, clear the check box for the applicable point code.
점 코드 사이의 형상선을 삭제하려면 해당 점 코드의 확인란 선택을 취소합니다.
This process also assigns symbols to point features based on a feature name within a point code.
또한 이 프로세스에서는 점 코드 내의 피쳐 이름을 기준으로 점 피쳐에 기호를 지정합니다.
Use existing point code, if any, among curb and gutters.
연석 및 측수로 사이에 기존 점 코드(있을 경우)를 사용합니다.
Specifies how the feature lines for the corridor are branched if a point code is used a varying number of times at different stations
여러 측점에서 다양한 수로 점 코드를 사용한 경우 코리더의 형상선이 분기되는 방법을 지정합니다.
Outward branching and extra points (with the same point code) are not connected
외향 분기와 외부 점(같은 점 코드)이 연결되지 않았습니다.