Enhanced testability and reliability
In addition to that, it has a design for testability.
Precautions should be taken when removing and handling components to ensure that electrical or physical damage does not occur and package testability is maintained.
부품을 제거 및 취급할 때에는 전기 또는 물리적 손상이 발생하지 않고 테스트 용이성이 유지되도록 예방 조치를 취해야 합니다.
Software testability means how easily a computer program can be tested.
In order to ensure the testability of electrical performance, the test point design mainly has the following requirements.
전기적 성능의 테스트 가능성을 보장하기 위해 테스트 포인트 디자인에는 주로 다음 요구 사항이 있습니다.
Experts can use the results to optimize existing software, design new software, and improve testability.
전문가는 결과를 이용하여 기존 소프트웨어를 최적화하고 새로운 소프트웨어를 설계하며 검증 결과를 향상시킬 수 있습니다.
Model2 is an excellent alternative for improving the testability of an application.
Model2는 응용 프로그램의 테스트 용이성을 개선할 수 있는 훌륭한 대안입니다.
Cache testability circuit for embedded diagnostics
Improve product quality and reliability, reduce the cost of product life cycle, testability design technology can easily obtain the feedback information of PCB board test, can easily make fault diagnosis according to the feedback information.
제품 품질 및 신뢰성 향상, 제품 수명주기 비용 절감, 테스트 가능성 설계 기술은 PCB 보드 테스트의 피드백 정보를 쉽게 얻을 수 있으며 피드백 정보에 따라 결함 진단을 쉽게 할 수 있습니다.
In general Tight Coupling is bad in but most of the time, because it reduces flexibility and re-usability of code, it makes changes much more difficult, it impedes testability etc.
일반적으로, 꽉 커플링은 나쁜 하지만 대부분의 시간, 그것은 유연성과 코드의 재 사용성을 감소 하기 때문에, 그것은 훨씬 더 어렵게 변경, 그것은 테스트 능력 등을 방해.
6, testability: PCB circuit board manufacturers through the purchase of advanced test equipment and instruments and establish a complete test program to detect and identify the product quality and service life of PCB proofing.
6, 테스트 가능성: 고급 테스트 장비 및 악기의 구매를 통해 PCB 회로 기판 제조 업체 및 PCB의 제품 품질 및 서비스 수명을 감지하고 식별하는 완벽한 테스트 프로그램을 확립.
Therefore, the electrical and physical and mechanical conditions of the testability of the PCB should be fully considered when designing the PCB board, and appropriate mechanical and electronic equipment should be used for testing.
따라서 PCB 보드를 설계할 때 PCB의 테스트 가능성에 대한 전기적, 물리적, 기계적 조건을 충분히 고려하고 테스트를 위해 적절한 기계 및 전자 장비를 사용해야 합니다.
BSDL models are used to describe the testability features of devices supporting boundary scan.
BSDL 모델은 바운더리 스캔을 지원하는 장치의 테스트 기능을 설명하는 데 사용됩니다.