Undersize measurement results outside of tolerance (-0.01)
공차를 벗어난 언더사이즈 측정 결과 (-0.01)
Undersize jaws will grip along six edges, whereas oversize jaws will grip only along the center of each jaw
특대 턱 각 턱 가운데에 맞춰만 그립 것 이다 반면 언더사이즈 턱 것 이다 6 개의 가장자리를 따라 그립
For easy installation, the heaters are made slightly undersize relative to their nominal diameter.
The four colors are used to indicate whether an inspection point is oversize or undersize and within or outside of the specified oversize/undersize tolerances.
네 가지 색상을 사용하여 검사점이 오버사이즈인지 언더사이즈인지, 지정한 오버사이즈/언더사이즈 공차의 내부 또는 외부에 있는지를 나타냅니다.
Product Description All RFS 2&4 way locating pins must be tapered with a 5 -10 angle and be dimensionally capable of locating parts, which may be running at 10% undersize to 10% oversize relative to print... Read More
제품 설명 모든 RFS 2&4 방법 위치를 알아내는 핀은 5º -10º 각으로 가늘게 하고 10% 너무 크은 상대적인 인쇄 구멍 크기 및 포용력에 왜소한 10%에 달릴지도 모르다 부속을 정하기 차원으로 가능해야 합니다. MMC 거주는 특정한 경우에 요구될지도 모르곱... Read More
Other issues can involve using undersize filtration components to do the job.
The inspection points are grouped as oversize or undersize and according to whether they are within or without the specified tolerances.
The unit can quickly separate a few oversize or undersize particles from a quantity of materials
For easy installation, the heaters are made slightly undersize relative to their nominal diameter.
Where 'E' is the efficiency, 'e' is percentage of undersize in feed and 'v' percentage of undersize in the Screen over size.
"Efficiency" of Vibrating Screen is the ratio of the amount of undersize obtained to the amount of undersize in the feed.