The components contain a powerful parameterisation and configuration system, being designed in such a manner that any legislative or organisational changes occurring are operable with minimal efforts.
Componentele conţin un puternic sistem de parametrizare şi configurare, fiind proiectate astfel încât modificările legislative sau organizatorice care intervin să fie operabile cu eforturi minime.
If the appliance has a special status (start-up, failure, calibration, parameterisation, maintenance etc.), this shall be indicated.
În cazul în care aparatul se află într-o stare specială (pornire, defecțiune, calibrare, parametrizare, întreținere etc.), aceasta trebuie indicată.
Differentiation of media by parameterisation of the switching outputs
Integrated file saving within CX-One Allows graphical parameterisation of peer-peer and fieldbus networks
Salvarea fişierelor integrată în CX-One Permite parametrizarea grafică a reţelelor de tip P2P şi magistrale
In addition to the SPECTRO-3-Scope MSMANA parameterisation software, a monitoring software also is used here.
Pe lângă software-ul de parametrizare al senzorului, SPECTRO-3-Scope MSMANA, în acest caz mai este utilizat un software de monitorizare.
The first value in the table that matches the currently processed NORM value is output at the digital outputs either directly or binary-coded (depending on the parameterisation and on the number of taught values).
Prima valoare din tabel care se potrivește cu valoarea curentă NORM procesată este transmisă la ieșirile digitale fie direct, fie prin codare binară (în funcție de stabilirea parametrilor și de numărul valorilor instruite).
When parameterisation is finished the edge detector can be disconnected from the PC again.
Direct coupling of the pyrometer to the optics and parameterisation using TruControl.
For such applications the evaluation mode NORM is selected in the RLS-GD-Scope V4.8 parameterisation software.
Pentru astfel de aplicații, se selectează modul NORM din programul de stabilire a parametrilor RLS-GD-Scope V4.8.
Parameterisation of time constant and intensity for up to 31 products.
Remote parameterisation is key in this application.
The RLS-GD-Scope V... software also is used as a user interface in gloss inspection for parameterisation of the gloss sensor and for monitoring the raw data of the determined values.
Programul RLS-GD-Scope V... se utilizează și ca interfață a utilizatorului pentru verificarea luciului în vederea stabilirii parametrilor pentru senzorul de luciu și a monitorizării datelor brute ale valorilor stabilite.
Allows full parameterisation and programming of motion controller + drives network off-line or on-line Downloads
Permite parametrizarea completă şi programarea controlerelor de mişcare, asigurând comutarea reţelei offline sau Manual de operare