Single-precision values with float type have 4 bytes, consisting of a sign bit, an 8-bit excess-127 binary exponent, and a 23-bit mantissa.
Значения с одиночной точностью и типом float имеют 4 байта, состоят из бита знака, 8-разрядной двоичной экспоненты excess-127 и 23-битной мантиссы.
Other results
For the binary formats, the representation is made unique by choosing the smallest representable exponent allowing the value to be represented exactly.
In binary floating-point arithmetic, division by two can be performed by decreasing the exponent by one (as long as the result is not a subnormal number).
В двоичной системе при работе с числами с плавающей запятой деление на два можно выполнить, уменьшив показатель степени на единицу (до тех пор, пока результат не будет являться денормализованным числом).
Floating point types have a storage binary format divided into three distinct fields: the mantissa, the exponent and the sign bit which stores the sign of the floating point value.
Типы плавающей точки имеют бинарный формат хранения, разделённый на три поля: мантисса, экспонента и знаковый бит, который хранит знак значения с плавающей точкой.
That is, if our exhibit = +7 (111 in binary), then shifted exponent = 7 +127 = 134.
The encoding scheme for these binary interchange formats is the same as that of IEEE 754-1985: a sign bit, followed by w exponent bits that describe the exponent offset by a bias, and p - 1 bits that describe the significand.
Схема кодирования этих двоичных форматов обмена такая же, как и для IEEE 754-1985: знаковый бит, за которым следуют индексы, которые описывают смещение экспоненты, и p-1 биты, которые описывают значение.
The encoding scheme for these binary interchange formats is the same as that of IEEE 754-1985: a sign bit, followed by w exponent bits that describe the exponent offset by a bias, and p-1 bits that describe the significand.
Схема кодирования этих двоичных форматов обмена такая же, как и для IEEE 754-1985: знаковый бит, за которым следуют индексы, которые описывают смещение экспоненты, и p-1 биты, которые описывают значение.
The highest exponent may alternatively be found by calculating it based on the current base of the base vector base, the number base (binary, decimal, hexadecimal, ...) for the number X and the msp.
Наибольший показатель в альтернативном варианте может быть найден путем вычисления с использованием текущего основания вектора base оснований, основания системы счисления (двоичная, десятичная, шестнадцатеричная, ...) числа X и msp.