The maximum current density for a desirable alloy coating and/or diffusions is 10 amperes/dm., when operating within the above addressed temperature ranges of this disclosure.
Максимальная плотность тока для требуемого покрытия электроосажденным сплавом и/или диффузионного покрытия составляет 10 ампер/дм2, при работе в пределах температурного диапазона, указанного выше в данном раскрытии изобретения.
The maximum current density in the sheet is on the order of 10-10 A/m² (10-4 A/km²).
The maximum current density in the sheet is on the order of 10-10 A/m² (10-4 A/km²).
The new MFCs generated a maximum current density that is 157% higher and a maximum power density that is 68% higher than traditional MFCs.
Other results
The invention makes it possible to produce a high-temperature conductor for operating at a nominal alternating voltage of 36 kV and higher, with a nominal frequency of 50 Hz, allowing a maximum operating temperature of 210ºC at maximum current densities.
The current maximum recommended keyword density is around 2.5%.
It delivered a maximum voltage of 124 volts, a maximum current of 10 microamps and a maximum power density of 0.22 millwatts per square centimetre.
Figure 4 shows the dependence of the efficiency on current density for a modern power-LED: this device, which can operate at current levels up to 1 A, loses the 20% of its maximum efficiency at the higher current condition.
4 показана зависимость эффективности от плотности тока для современного светодиодного модуля: устройство, способное работать с токами до 1 А, теряет 20% от своей максимальной эффективности на более высоких значениях тока.
Engineers measured the current density to ensure the circuit would not overheat.
Инженеры измерили плотность тока, чтобы убедиться, что цепь не перегреется.
In this experiment, we calculated the current density across a small area.
An uneven current density can lead to a failure in the electrical circuit.
Неравномерная плотность тока может привести к сбою в электрической цепи.
Calculating current density accurately is vital for efficient electrical engineering.
Точное вычисление плотности тока крайне важно для эффективного электротехнического проектирования.
The faradaic current density was recorded during the battery experiment.
Плотность фарадеевского тока была зафиксирована во время эксперимента с батареей.