In 1841 Whitworth devised a standard for screw threads with a fixed thread angle of 55º and having a standard pitch for a given diameter.
В 1841 году Витуорт разработал стандарт для мелкой резьбы с фиксированным углом канавки 55º и имеющей стандартный шаг для данного диаметра.
In addition, the thread angle is 55 degrees, as with the obsolete British Whitworth system, rather than 60 degrees as with U.S. and metric threads.
Угол наклона резьбы 55 градусов, как в устаревшей британской системе Витворта, в отличие от 60 градусов метрической системы или стандарта США.
In 1841 Whitworth devised a standard for screw threads with a fixed thread angle of 55º and having a standard pitch for a given diameter.
В 1841 году Витуорт разработал стандарт для мелкой резьбы с фиксированным углом канавки 55º и имеющей стандартный шаг для данного диаметра.
Other results
The incision, under any conditions, always disrupts both those and other threads at different angles randomly.
Разрез же при любых условиях всегда беспорядочно нарушает как те, так и другие нити под различными углами.
In the unperturbed motion the angle the threads make with the vertical is zero, and the disk moves along the vertical and rotates around its horizontal axis.
В невозмущенном движении угол, который составляют нити с вертикалью, равен нулю, а диск движется вдоль вертикали, вращаясь вокруг своей горизонтальной оси.
M14, 5/8 -11, 22.2 Bore thread for use with angle grinders
The thread step constitutes from 1.6 to 2.0 heights of the thread profile, the angle of the tooth profile constitutes 20-35.
Шаг резьбы составляет от 1,6 до 2,0 высот профиля резьбы, угол профиля зуба составляет 20-35º.
And I was surprised that the thread can be cut at an angle.
И еще меня удивило то, что нить может резать под углом.
At any angle banknotes images on the thread have the effect of movement.
При любом ракурсе банкноты изображения на нити имеют эффект движения.
The conical thread profile has a negative angle along the bearing face.
Профиль конической резьбы имеет отрицательный угол по опорной грани.
Screw extractors have a cylindrical polished body, on one third of which the left conic thread is cut and the tip is made at an obtuse angle.
Винтовые экстракторы имеют цилиндрический шлифованный корпус, на одной трети которого нарезана левая коническая резьба и наконечник, выполненный под тупым углом.
turning, it was necessary to combine the angle with any thread, it was the first mark
поворачивая, надо было совместить угол с какой-либо нитью, это была первая отметка
The spinal column (from the angle of the esoteric sciences) houses a threefold thread.
Позвоночный столб (с точки зрения эзотерических наук) содержит в себе тройную нить.