This menu appears when you enter the BIOS setup program and
Denna meny visas när du öppnar BIOS inställningsprogram och visar
You must enter the Service Tag in the BIOS setup program after you replace the system board.
Du måste ange servicenumret i BIOS när du har satt tillbaka moderkortet.
2 Press F2 when the DELL logo is displayed to enter the BIOS setup program.
2 Tryck på<F2>under självtestet vid strömpåslag för att starta systeminställningsprogrammet.
You must enter the Service Tag in the BIOS setup program after you replace the system board.
Du måste ange servicenumret i BIOS när du har bytt ut moderkortet. OBS!
If you have a large disk, you might have to use cylinder translation techniques, which you can set from your BIOS setup program, such as LBA (Logical Block Addressing) or CHS translation mode ("Large").
Om du har en stor disk, måste du kanske använda tekniker för cylinderöversättning, som du kan ställa in från ditt BIOS-konfigurationsprogram, såsom LBA (Logisk blockadressering) eller CHS-översättningsläget ("Large").
Due to the limitation of the Intel H81chipset, Intel Rapid Start Technology can be configured only from the BIOS Setup program.
På grund av Intels H81-kretsuppsättningsbegränsning kan Intels Rapid Start-teknik enbart konfigureras från BIOS inställningsprogram.
Due to the limitation of the Intel H81chipset, Intel Rapid Start Technology can be configured only from the BIOS Setup program.
Beroende på begränsningen hos Intel H81-kretsuppsättningen kan Intel Rapid Start Technology endast konfigureras från BIOS-inställningsprogrammet.
Potentially sensitive or inappropriate content
Examples are used only to help you translate the word or expression searched in various contexts. They are not selected or validated by us and can contain inappropriate terms or ideas. Please report examples to be edited or not to be displayed. Potentially sensitive, inappropriate or colloquial translations are usually marked in red or in orange.