An electronic controlled variable geometry turbocharger delivers outstanding performance.
An electronically controlled variable geometry turbocharger generates boost pressure.
The purpose of this control loop is to maintain the controlled variable (room air temperature) to some desired value, called a setpoint.
Bu kontrol çevriminin amacı, kontrol edilen değişkenini (oda hava sıcaklığı), bir ayar değeri olarak adlandırılan, istenilen değer için muhafaza etmektir.
The objective of feed forward control, also known as predictive control, is to measure or predict any potential open-loop disturbances and compensate for them manually before the controlled variable deviates too far from the original set point.
Tahmini kontrol olarak da bilinen ileri besleme kontrolünün amacı, herhangi bir potansiyel açık çevrim bozukluğunu ölçmek veya tahmin etmek ve kontrol edilen değişken orijinal ayar noktasından çok uzaklaşmadan önce manuel olarak telafi etmektir.
However, if the objective is to control the speed of the automobile, then the amount of pressure exerted on the accelerator is the actuating signal, and the vehicle speed is the controlled variable.
Eğer amacımız, otomobilin hızını kontrol etmek ise, ivmelendiriciye uygulanan basıncın girdiye (amaca), araç hızı ise kontrol edilen değişkene karşılık düşmüş olur.
Mechanically controlled variable sequence manipulation mechanisms which are automated moving devices operating according to mechanically fixed programmed motions.
(c) Mekanik olarak sabitlenmiş programlı hareketlere göre çalışan ve mekanik olarak kontrol edilebilen hareket kabiliyeti değişken manipülasyon mekanizmaları.
x: Actual value or controlled variable (measured filling level)
MIXING REVOLUTION SPEED: While it can be set at a constant single speed, the speed control can also be available with a converter controlled variable speed.
Karıştırma Devri: Sabit tek devir olabileceği gibi, hız kontrol frekans konvertör kontrollü olarak değişken devirli de olabilmektedir.