A special interface cable may be needed, please see the manual.
The sensor detects faint signal fluctuations and selects them from the average statistical noise characteristics of the field and converts them to a digital sequence that is processed by a microprocessor, which is then transmitted to the computer through the interface cable.
Sensör soluk sinyal dalgalanmalarını tespit eder ve bunları alanın ortalama istatistiksel gürültü özelliklerinden seçer ve bunları bir mikroişlemci tarafından işlenen ve daha sonra bilgisayara arabirim kablosu aracılığıyla iletilen bir dijital diziye dönüştürür.
This method is definitely not for the beginner, and the resulting controller still requires a FTDI USB To Serial Interface Cable in order to program the chip.
Bu yöntem kesinlikle yeni başlayanlar için değildir ve sonuçta elde edilen kontrolör hala çipi programlamak için bir FTDI USB Seri Arabirim Kablosu gerektirir.
You will, of course, need a 2B control box (Read my review of the 2B E-Stim Control Box), and you will also need a 2B Digital Link Interface Cable.
Elbette bir 2B kontrol kutusu (Benim yorumumu okuyun 2B E-Stim Kontrol Kutusu) ve ayrıca bir 2B Dijital Bağlantı Arabirim Kablosu.
I need a parallel interface cable for my daughter's laptop.
If the problem is resolved, replace the interface cable with a known good cable.
Sorun devam ediyorsa, kabloyu bilinen sağlam bir kablo ile değiştirin.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.
Korumalı bir kablo kullanılması, FCC kuralları Kısım 15 B Sınıfı sınırlarına uyulması için gereklidir.
Longer User interface cable for Servo-u and Servo-n
Servo-u ve Servo-n ventilatör sistemleri için daha uzun Kullanıcı arayüzü kablosu
This system is composed of SMART MATRIX 64H Programming/ Control Terminal combined to IS4F HTS yarn control sensors through a single multiport interface cable.
Sistem, SMART MATRIX 64H'nın Kontrol ve Kontrol/ Planlama Terminalinden oluşmaktadır.