The deviator is a distributor or an additional locking device with several bolts.
Девіатор є розподільник або додатковий пристрій замикання з декількома ригелями.
The influence of the third invariant of a stress deviator is examined on the basic characteristic of constructional materials durability that will further allow to prove approaches to the resource evaluation regarding operational factors.
Вивчено вплив третього інваріанта девіатора напружень на основну характеристику довговічності, що в подальшому дозволить обґрунтувати підходи щодо оцінки ресурсу конструкційних матеріалів з урахуванням ряду експлуатаційних факторів.
From the point of view of statistical meaningfulness appeared the best equation that as stress deviator parameter contained the module of the normalized third deviatoric stress invariant.
Найкращим з точки зору статистичної значущості виявилося рівняння, яке в якості параметру виду девіатора напружень містило модуль приведеного третього інваріанту девіатора напружень.
It is shown that the known diagrams of plasticity, reflecting dependence of the accumulated deformations to destruction from the dimensionless indexes of the tense state depend on the chart of the tense state, in particular from the third invariant of tensor or stress deviator.
Показано, що відомі діаграми пластичності, що відображають залежність накопичених деформацій до руйнування від безрозмірних показників напруженого стану залежать від схеми напруженого стану, зокрема від третього інваріанту тензора або девіатора напруги.
They approximate the values of limiting surface depending on the relations that associate stress intensity and hydrostatic pressure for two angles of the stress deviator type.
Запропоновані нові інтерполяційні формули, апроксимуючі значення граничної поверхні, виходячи із співвідношень, котрі пов'язують інтенсивність напруження та гідростатичний тиск для двох кутів виду девіатора напружень.
A quantitative characterization of the stress state can be given by means of two parameters which describe, accordingly, by the volume constituent of tensor and stress deviator mode.
Кількісна оцінка виду напруженого стану може бути дана за допомогою двох параметрів, які характеризують, відповідно, об'ємну складову тензора і вид девіатора напружень.
Influence of the volume constituent of tensor is characterized by the stress triaxiality parameter, and stress deviator mode - by the Lode parameter, Lode corners or normalized third deviatoric stress invariant.
Об'ємну складову тензора напружень характеризує параметр жорсткості навантаження, а вид девіатора напружень - параметр Лоде, кути виду напруженого стану або нормований третій інваріант девіатора напружень.