Download for Windows Premium
Publiciteit
ZeitcodeAnzeige

Vertaling van "ZeitcodeAnzeige" in Engels

We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
time code display
timecode display
Wahl des Inhalts der zweiten Zeile der Zeitcodeanzeige.
Selects the content of the second line of the time code display.
Während der Wiedergabe wechselt die Zeitcodeanzeige automatisch auf CLIP und zählt jeden Clip von 0:00:00 weiter.
During playback, the time code display automatically changes to CLIP and counts each clip from 0:00:00.
Wechseln zwischen Dauer- und Zeitcodeanzeige in der Skizzenbilder-Anzeige
To switch between duration and timecode display in the thumbnail display
Wählt den Typ der Zeitcodeanzeige auf der Zeitdatenanzeige aus (TC oder VITC).
Selects the type of timecode display in the time data display section (TC or VITC).
Zeitcodeanzeige auf dem monochromen LCD
Timecode display on the monochrome LCD
Der Zeitcode des neuen Out-Punktes erscheint in der Zeitcodeanzeige und die Anzeigen Total (Gesamtlänge) und DUR (Cliplänge) werden aktualisiert.
The timecode of the new Out point appears in the timecode display, and the Total (total duration) and DUR (clip duration) displays are updated.
Auch wenn dies auf ON steht, werden die Zeitcodeanzeige, die Anzeige der Audio-Pegelmessung, die Fokus-Informationsanzeige und die Anzeige der Zoom-Stellung nicht angezeigt.
Even when set to ON, the time code display, audio level meter display, focus information display, and zoom position display are not displayed.
Es wird ein Anfangszeitcodewert eingestellt, und der Monitor kehrt zur Zeitcodeanzeige zurück, bevor die Taste HOLD in Schritt 2 gedrückt wurde.
An initial time code value is set and the monitor returns to the time code display before the HOLD button was pressed in step 2.
Stellt die Zeitspanne zum Ausschalten der Zeitcodeanzeige nach Ausschalten des Camcorders ein, wenn die Option MODE SELECT (siehe oben) auf TIMER (H
Sets the duration of time after which the TC display is to be turned off after power-off, when the MODE SELECT item, above, is set to TIMER (H
Er zijn geen resultaten gevonden voor deze term.

Synoniemen voor ZeitcodeAnzeige in het Duits

Publiciteit

Resultaten: 9. Exact: 9. Verstreken tijd: 16 ms.