Winkelmesser-Kompass mit Richtungsskala in mils und Grad
A protractor compass with direction in mils and degrees
Die Dicke der Platte beträgt 41 mils.
The thickness of the plate is 41 mils.
Für Stiftkomponenten mit hoher Dichte ist der Abstand zwischen den Pads innerhalb der Vorrichtung typischerweise sehr klein, beispielsweise 6 mils.
For high density pin components, the spacing between pads within the device is typically very small, such as 6 mils.
Im Allgemeinen ist es empfehlenswert ein Rastermaß von 50.0 mils für Schaltpläne zu verwenden.
In general, it is recommended to use a grid of 50.0 mils for the schematic sheet.
Normalerweise ist eine Film Dicke von um 0.5 bis 1 mils des Konzentrats mehr als genug.
Normally, a film thickness of about 0.5 to 1 mils of the concentrate is more than enough.
Für die Simulationen wurden die Platten mit einer Dicke von 41 mils betrachtet und waren perfekt leitfähig.
For the sake of the simulations, the plates were considered to have a thickness of 41 mils and were perfectly conducting.
Breite, Höhe und Modulbreite können nun in Millimeter und in mils (0,001 inch) erfasst werden.
Width, height and module width can now be displayed in mils (0.001 inch) and in millimeters.
Folie nach Anspruch 7, worin die Dicke der Kernschicht bis zu etwa 7,6 µm (0,3 mils) beträgt.
A film according to claim 7 wherein the thickness of said core layer is up to about 7,6 µm (0.3 mils).
Bei einer bevorzugten Konstruktion ist eine Überstrecke in der Größenordnung von 3 mils (75 Mikrometer) ein nützlicher Konstruktionspunkt.
In a preferred construction, a distance of the order of about 3 mils (75 micrometers) is a useful design point.
Elektrochemische Zelle gemäss irgendeinem vorhergehenden Anspruch, bei welcher das Abstandshilfsmittel ein Abstandsglied enthält, das eine Höhe von mindestens 5 mils (130 µm) aufweist.
An electrochemical cell according to any preceding claim, wherein the stand-off means comprises a stand-off member that has a height of at least 5 mils (130 µm).
Liest Barcodes bis zu 0,10 mm (4 mils) Auflösung bei bis zu 200 Scanvorgängen pro Sekunde.
Reads barcodes down to 4 mils resolution at up to 200 scans per second.
Die Einrichtung aus Anspruch 1, wobei der hochenergetische Bearbeitungsstrahl benutzt wird, um Löcher zu bohren, deren Durchmesser kleiner als 90 µm (3,5 mils) ist.
The apparatus of claim 1 wherein the high energy machining beam is used to drill holes having a diameter smaller than about 90 µm (3,5 mils).
(50 mils) unter der Unterseite der gedruckten Schaltungsplatine und parallel zu dieser Unterseite positioniert werden kann.
(50 mils) below the underside of the printed circuit board, and parallel to the underside.