Vertaling van "zum Array" in Engels
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Die gesamte Hashtabelle wird als ein einziges Objekt zum Array addiert.
The entire hash table is added to the array as a single object.
Anwender müssen autorisiert sein und haben standardmäßig keinen Zugang zum Array.
Users must be authorized and have no access to the array by default.
Später fügen wir unseren Login-Controller zum Array hinzu.
Dadurch können außergewöhnlich genaue Berechnungen in der Ebene, selbst bei mittleren und kurzen Distanzen zum Array, erstellt werden.
With this, the software produces extraordinarily precise calculations of the level - even with mid-range and short distances to the array.
Die häufigsten Aufgaben, die bei der Nutzung eines Arrays auftreten können, sind das Hinzufügen eines neuen Elements zum Array und das Hinzufügen eines neuen Elements unter der Annahme, dass das Element mit dem angegebenen Wert nicht im Array existiert.
The most common tasks that may arise when using an array - are adding a new element to the array and adding a new element, provided that the element with given value does not exist in the array.
Da die Nummern 10-30 bereits von EXT:form reserviert sind, starten wir einfach mit der Nummer 100, um unseren Pfad zum Array der Dateipfade hinzufügen.
As the numbers 10 to 30 are already reserved by form, we'll use a higher number like 100 to add our path to the array of file paths.
Verlust der Konnektivität zum Array
Loss of connectivity to the array
Manche RAID-Controller markieren zum Array zugehörige Festplatten mit einem Flag, wenn sie als beschädigt erkannt werden.
Some RAID controller mark associated disks to the array with a flag, if they are detected as damaged.
Überprüfen, dass jeder angeschlossene Host in einer Massenspeichergruppe enthalten ist, dass ihm mindestens eine LUN zugeordnet wurde und dass der Managementserver eine LAN-Verbindung zum Array besitzt
Ensure each mount host is in a storage group with at least one LUN assigned to it, and the management server has LAN connection to the array
Stellen Sie sicher, dass ein einzelner Pfad vom Server zu den einzelnen Geräten des Arrays vorhanden ist. Installieren Sie PowerPath, und fahren Sie den Server herunter. Schließen Sie zusätzliche Kabel vom Server zum Array an. Schalten Sie anschließend den Server ein.
Confirm that there is a single path from the host to each device on the array, install PowerPath, shut down the host, connect additional cables from the host to the array, and then power on the host.
Ist das Dokument ein JSON-Objekt, sollte der Parameter "JSON-Stamm" einen durch einen Punkt getrennten Pfad zum Array in Ihrem Objekt enthalten.
If the document is a JSON object, the parameter "JSON root" should contain a dot-separated path to the array inside your object.
Entsprechend den Empfehlungen unter auf Seite sollte jeder VMware ESX Server über mindestens vier separate Pfade zum Array verfügen.
Given the recommendations in the "" section on page, every ESX Server should have, at the very least, four separate paths to the array.
Wenn die JSON-Datei ein JSON-Objekt ist, geben Sie den ijson-Pfad zum Array in das Textfeld ein.
If the JSON file is a JSON object, write the ijson path to the array in the textbox.