Alternately turn the right and left nip adjustment knobs A in the counter-clockwise direction and adjust the nip width until just before the film of water is no longer visible over the entire metering roller.
按逆时针方向交替转动左右压印线调节旋钮 A,调节压印线,直到整个计量辊上刚好看不到水膜为止。
If the nip width between the dampening form roller and plate surface needs adjustment, adjust with the left and right plate-form adjustment knobs A. After the nip width between the dampening form roller and plate surface is properly adjusted, recheck the nip width between the dampening form roller and dampening oscillating roller.
如果需要调节着水辊与印版表面之间的压印线宽度,可利用左右的印版-着水辊调节旋钮 A 进行调节。
External, manual adjustment of set points with Photohelic controller adjustment knobs.
通过 Photohelic 控制器调节旋钮在外部手动调节设定点。
Using the adjustment knobs, align the springs with the sheet.
The mixer is operated using two adjustment knobs. One adjusts the percentage of CO2 in Argon, and the other is used to adjust the gas mixture flow 8 - 25 l/min.
Er worden alleen voorbeelden gegeven om u te helpen het woord of de woordcombinatie waarop u hebt gezocht, te vertalen. Deze worden niet door ons geselecteerd of gevalideerd en kunnen ongepaste taal bevatten. Wij vragen u melding te maken van voorbeelden die dienen te worden aangepast of verwijderd. Vertalingen met grof of informeel taalgebruik worden meestal rood of oranje gemarkeerd.