The residual ash content remains within the legally specified limits during nibs treatment.
The ash content is a conventional expression for the residue on ignition from a solid sample according to certain testing procedures.
灰分含量是按照特定试验过程将固体样品进行灼烧后留下的残渣的一种常用的表述。
The analysis of ash content is essential during the milling phase.
在制粉阶段,灰分含量的分析至关重要。
Excellent valve recession protection due to ash content.
提供出色的阀门沉陷保护,这要归因于灰分含量。
This is due to the high ash content of the product: attempts to burn the husks in the ovens lead to breakages.
这是由于该产品的灰分含量高:试图烧烤炉中的外壳导致破损。
As a starting point for checking, a balance is compiled from the actual status and contains as its main data the mass flow, stock consistency, volumetric flow, ash content and ash mass flow.
作为检查的起点,可根据系统的实际状态确立一种平衡,并将质量流量、浆料浓度、体积流量、灰分含量和灰分质量流量作为主要数据。
For use in older performance 4-stroke gas engines requiring a natural gas engine oil with a medium ash content.
适于在需要天然气发动机油且具有中度灰分含量要求的较旧 4 冲程燃气发动机中使用。
The water filter media is hydraulically classified to reduce foreign mineral matter and to lower ash content.
水滤料采用水工分类,可减少无关矿物质并降低灰分含量。
By virtue of coconut shell as our main ingredient, our shisha charcoal produces lower ash content than other materials made shisha charcoal.
水烟炭的主要原料是椰壳, 其灰分含量低于其他材料。这也是为什么椰壳是水烟炭的原料
The slagging, fouling and abrasiveness performances of co-firing low-temperature pyrolyzed biomass with coal depend on the ash content, the ash component of them and their blending rate, etc.
热解生物质与煤共燃时的结渣、积灰和磨损特性取决于热解生物质灰分含量、灰成分,煤的灰分含量、灰成分以及混合比例等因素。
After fertilization treatment, the ash content in N. affinis increased along with the increment of K fertilizer dosage, and was little influenced by N fertilizer dosage.
施肥处理后慈竹的灰分含量随K肥用量的增加而上升,受N肥用量影响不大。
Particle emissions are especially formed in heavy fuel oil applications due to the ash content of the fuel and its combustion characteristics. Two different systems can reduce these already low particle emissions further
根燃料的灰分含量和燃特性,w粒的排放量主要是在重油用中a生。以下不同的系y,可以M一步降低 些已很低的w粒物的排放:
Electric traction motor brush Determination want the following items: brush size and machining accuracy, brush braided strength, riveting parts of resistance, resistivity, hardness, ash content and its composition, volume ratio, porosity, compressive strength, flexural strength, elastic modulus, friction coefficient and its fluctuations in the scope, impact strength and impact damage limit, current density and its distribution capacity, as well as sliding contact characteristics (voltage and current characteristics) and so on.
牵引电机用电刷要测定如下项目:电刷的尺寸和加工精度,刷辫强度,铆接部位电阻,电阻系数,硬度,灰分含量及其组份,体积比重,气孔率,抗压强度,抗折强度,弹性模量,磨擦系数及其波动范围,冲击强度和冲击破损极限,电流密度及其分布能力以及滑动接触特性(电压和电流特性)等。