Engels

Arabisch Catalaans Chinees Deens Duits Engels Frans Grieks Hebreeuws Hindi Hongaars Italiaans Japans Koreaans Nederlands Oekraïens Perzisch Pools Portugees Roemeens Russisch Slowaaks Spaans Thai Tsjechisch Turks Vietnamees Zweeds

Chinees

Definitie Arabisch Catalaans Chinees Deens Duits Engels Frans Grieks Hebreeuws Hindi Hongaars Italiaans Japans Koreaans Nederlands Oekraïens Perzisch Pools Portugees Roemeens Russisch Slowaaks Spaans Thai Tsjechisch Turks Vietnamees Zweeds

Favorieten

Publiciteit

bending test

Vertaling van "bending test" in Chinees

NEW

弯曲试验

弯曲测试

弯曲试验机

冷弯试验

抗折试验机

This is tested by performing a two-point bending test, for example.

例如，通过两点弯曲试验对它进行测试。

Determination of hydrogen brittleness test method with a delay damage, slowly bending test method, etc.

测定氢脆的方法有延迟破坏试验﹑缓慢弯曲试验等方法。

Tension test and bending test for material

材料拉伸、弯曲测试

Xue Lei said this, in fact, good low mobile phone screen is not good on the low processing, but the processing can be passed out of something related to testing, such as the four-point bending test, drop ball testing, strength testing, and so on.

对此薛磊表示，其实手机屏的良率低并不是加工上的良率低，而是加工出来的东西能否通过相关测试，例如四点弯曲测试、落球测试，强度测试等等。

Thus, for example, several load cases can be covered; whether it be a bending test, torsion test or complete 1: 1 simulated movements, all possible load cases can be realized with a working machine.

例如，可以覆盖多个负载情况；包括弯曲试验、扭转试验还是完整的1∶1模拟运动，所有可能的负载情况都可以在工作机上实现。

Previous:bending test

上一篇：弯曲试验

At least one tensile and one bend test should be taken from each forging; but, if the weight exceeds three tons, a tensile and a bending test should be taken from each end. Small forgings made from one ingot may be dealt with under the provisions of paragraph 147 (d).

（a）每块锻件至少应作一次抗拉测试及一次弯曲测试。但锻件重量如超逾3吨，则其每端均应作一次抗拉测试及一次弯曲测试。由一锭块制造出来的细小锻件可根据第147（d）条的条文处理。

"Where more than one casting is made from one charge, at least one tensile and one bending test should be made from the castings run from one common pouring head; but separate tests should be made from each casting or set of castings run from each separate pouring head. Small castings may, however, be dealt with in accordance with the provisions of paragraph 147(d)."

如一份装料造成多于一件铸件，则由同一灌注压头所出的铸件至少应作一次抗拉测试及一次弯曲测试；但由每个独立灌注压头所流出的每件铸件或每组铸件，则应作独立测试。不过，细小铸件可以按照第147（d）条的条文处理。

The effects of thickness and notch orientation on the toughness of X70 pipeline steel samples with V notch were investigated experimentally by use of the 3-point bending test at different temperature.

通过不同温度条件下不同厚度、不同缺口取向含V形缺口试样进行3点弯曲试验研究，发现X70管线钢具有严重的各向异性现象，其在平行钢板表面方向和沿钢板厚度方向力学性能差异较大。

For the bending test onmanufacturers and quality inspection departments on the power line, DC line.

适用于有关生产厂家和质检部门对电源线、DC线进行弯曲试验。

WEW - C microcomputer screen explicit universal testing machine oil cylinder underneath structure is used to host, stretching space is located at the top of the host, compression, bending test space between beams and workbench, host below, by the beam space, the moving adjustment test under beam lifting motor, worm gear and worm, nut rotation drives the lifting beam. Hydraulic clamping sample. Usi...

WEW-C微机屏显式万能试验机主机采用油缸下置式结构，拉伸空间位于主机的上方，压缩、弯曲试验空间位于主机下方下横梁和工作台之间，通过下横梁的移动调整试验空间，下横梁升降采用电机、？#19979；？#34583；杆、螺母转动带动横梁升降。液压方式夹紧试样。测力机构采用传感器测力，使用自主研发POP-PI型微机屏显系统，能够显示试验力、峰值、变形和各种试验曲线，能够打印各种试验报告（需要特殊定制），用户也可以自己编辑试验报告的格式。...

The bending properties of cement mortar externally bonded with carbon fiber reinforced plastics(CFRP) sheets at different temperatures were studied by means of three-point bending test.

用三点弯曲试验研究了水泥砂浆外贴碳纤维片材后在不同温度下的抗弯性能，探讨了温度对碳纤维增强塑料（CFRP）-水泥砂浆抗弯性能的影响。